Datasheet

LM22676
LM22676-Q1
www.ti.com SNVS587K –SEPTEMBER 2008–REVISED APRIL 2013
Absolute Maximum Ratings
(1)(2)
VIN to GND 43V
EN Pin Voltage -0.5V to 6V
SW to GND
(3)
-5V to V
IN
BOOT Pin Voltage V
SW
+ 7V
FB Pin Voltage -0.5V to 7V
Power Dissipation Internally Limited
Junction Temperature 150°C
For soldering specifications, refer to the following document: www.ti.com/lit/snoa549
ESD Rating
(4)
Human Body Model ±2 kV
Storage Temperature Range -65°C to +150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the recommended Operating Ratings is not implied. The recommended Operating Ratings
indicate conditions at which the device is functional and should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) The absolute maximum specification of the ‘SW to GND’ applies to DC voltage. An extended negative voltage limit of -10V applies to a
pulse of up to 50 ns.
(4) ESD was applied using the human body model, a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.
Operating Ratings
(1)
Supply Voltage (V
IN
) 4.5V to 42V
Junction Temperature Range -40°C to +125°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the recommended Operating Ratings is not implied. The recommended Operating Ratings
indicate conditions at which the device is functional and should not be operated beyond such conditions.
Electrical Characteristics
Limits in standard type are for T
J
= 25°C only; limits in boldface type apply over the junction temperature (T
J
) range of -40°C
to +125°C. Minimum and Maximum limits are ensured through test, design, or statistical correlation. Typical values represent
the most likely parametric norm at T
A
= T
J
= 25°C, and are provided for reference purposes only. Unless otherwise specified:
V
IN
= 12V.
Symbol Parameter Conditions Min
(1)
Typ
(2)
Max
(1)
Units
LM22676-5.0
V
FB
Feedback Voltage V
IN
= 8V to 42V 4.925/4.9 5.0 5.075/5.1 V
LM22676-ADJ
V
FB
Feedback Voltage V
IN
= 4.7V to 42V 1.266/1.259 1.285 1.304/1.311 V
All Output Voltage Versions
I
Q
Quiescent Current V
FB
= 5V 3.4 6 mA
I
STDBY
Standby Quiescent Current EN Pin = 0V 25 40 µA
I
CL
Current Limit 3.4/3.35 4.2 5.3/5.5 A
I
L
Output Leakage Current V
IN
= 42V, EN Pin = 0V, V
SW
= 0V 0.2 2 µA
V
SW
= -1V 0.1 3 µA
R
DS(ON)
Switch On-Resistance PFM Package 0.12 0.16/0.22 Ω
SO PowerPAD Package 0.10 0.16/0.20
f
O
Oscillator Frequency 400 500 600 kHz
T
OFFMIN
Minimum Off-time 100 200 300 ns
T
ONMIN
Minimum On-time 100 ns
I
BIAS
Feedback Bias Current V
FB
= 1.3V (ADJ Version Only) 230 nA
(1) Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation
using Statistical Quality Control (SQC) methods. Limits are used to calculate Ti's Average Outgoing Quality Level (AOQL).
(2) Typical values represent most likely parametric norms at the conditions specified and are not ensured.
Copyright © 2008–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM22676 LM22676-Q1