Datasheet

INA110
4
SBOS147A
www.ti.com
PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS
DYNAMIC RESPONSE (CONT)
Settling Time:
0.01%,G = 1 V
O
= 20V Step 5 12.5 * * * µs
G = 10 3 7.5 * * * µs
G = 100 4 7.5 * * * µs
G = 200 7 12.5 * * * µs
G = 500 16 25 * * * µs
Recovery
(5)
50% Overdrive 1 * * µs
POWER SUPPLY
Rated Voltage ±15 * * V
Voltage Range ±6 ±18****V
Quiescent Current V
O
= 0V ±3 ±4.5 * * * * mA
TEMPERATURE RANGE
Specification: P, U –25 +85 * * 0 +70 °C
G –55 +125 °C
Operation –55 +125 * * –25 +85 °C
Storage –65 +150 * * –40 +85 °C
θ
JA
100 * * °C/W
ELECTRICAL CHARACTERISTICS (Cont)
At +25°C, ±V
CC
15VDC, and R
L
= 2KΩ, unless otherwise specified.
INA110BG, SG INA110KP, KUINA110AG
* Same as INA110AG.
NOTES: (1) Gains other than 1, 10, 100, 200, and 500 can be set by adding an external resistor, R
G
, between pin 3 and pins 11, 12 and 16. Gain accuracy is a function
of R
G
and the internal resistors which have a ±20% tolerance with 20ppm/°C drift. (2) Adjustable to zero. (3) For differential input voltage other than zero, see Typical
Characteristics. (4) V
NOISE RTI
= √V
N
2
INPUT
+ (V
N OUTPUT
/Gain)
2
. (5) Time required for output to return from saturation to linear operation following the removal of an input
overdrive voltage.