User's Manual

EVM User’s Guide
TI Confidential – Strictly Private 6
2.1 Block Diagram
CC3100MOD
2x20 headers
Micro
USB
3.3V
LDO
Chip
Antenna
Jumper
Murata
Conn
Diode
Mux
5V
5V
3.3V
Current
Meas
J6
J8
U.FL
Conn
Vcc
LED
Indicators
SPI/UART/GPIO
Push
Buttons
Figure 2 : CC3100MODBOOST Block diagram
2.2 Hardware Features of the evaluation board
• CC3100MOD module with fully integrated solution.
2x20 pin stackable connectors
• On-board chip antenna with option for U.FL based conducted testing.
• Power from on-board LDO using USB OR 3.3V from MCU Launchpad
• Push buttons (3x), LEDs (2x)
• Jumper for current measurement with provision to mount 0.1R resistor for measurement
with voltmeter
• 2 Layer PCB with 6mil spacing and track width.