User's Guide Stereo Amplifier TPA2010D1

Description

1-3

Introduction

1.2 Description

The TPA2010D1 audio power amplifier evaluation module is a complete,

low-power single-channel audio power amplifier. It consists of the TI

TPA2010D1 2.5-W low-voltage Class-D audio power amplifier IC in a very

small NanoFree WCSP package, along with a small number of other parts

mounted on a circuit board that is approximately one and a quarter inches

square.

Single in-line header pins are mounted to the underside of the module circuit

board. These pins allow the EVM to be plugged into the TI Plug-N-Play audio

amplifier evaluation platform or to be wired directly into existing circuits and

equipment when used stand-alone.

The platform, which has room for a pair of TPA2010D1 evaluation modules,

is a convenient vehicle for demonstrating TI’s audio power amplifier and

related evaluation modules. The EVMs simply plug into the platform, which

automatically provides power to the modules, interconnects them correctly,

and connects them to a versatile array of standard audio input and output jacks

and connectors. Easy-to-use configuration controls allow the platform and

EVMs to quickly model many possible end-equipment configurations.

There is nothing to build, nothing to solder, and nothing but the speakers

included with the platform to hook up.

1.3 TPA2010D1 EVM Specifications

Supply voltage range, V

2.5 V to 5.5 V

Power supply current rating required 1 A

Continuous output power, P

: 4-Ω BTL, V

= 5 V 2.5 W

Audio input voltage, V

0 V to V

, max

Minimum load impedance, Z

4 Ω