Install a supermarket Squeegee Kit

IB 340182 (2-99) LITHO IN U.S.A.4
4. Loosen the two mounting knobs.
5. Pull the squeegee off the machine.
INSTALLING THE SQUEEGEE ASSEMBLY
1. Make sure the squeegee is raised.
2. Place the squeegee under the squeegee pivot.
3. Slide the squeegee frame onto the squeegee pivot.
4. Tighten the mounting knobs.
5. Push the squeegee suction hose on
the squeegee.
LEVELING THE SQUEEGEE
Leveling of the squeegee assures even contact the length
of the squeegee blade with the surface being scrubbed.
Make sure this adjustment is done on an even, level floor.
1. Turn the machine power on.
2. Lower the squeegee.
3. Drive the machine forward, then turn the machine
power off.
4. Look at the deflection of the squeegee blade, over
the full length of the squeegee blade.