Operator Manual

MAINTENANCE
3640 330580 (01--00)
44
SIDE BRUSH(ES)
The side brush(es) sweep debris along walls and
edges into the path of the main brush.
Check the side brush(es) for damage and wear
daily. Remove string or wire tangled in the side
brush(es).
A side brush should be replaced when it no longer
effectively sweeps for your application.
REPLACING THE SIDE BRUSH(ES)
1. Turn the machine power off and move the
directional lever into the PARK position.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, turn off machine, and remove
key.
2. Reach underneath the side brush and
remove the cotter pin that holds it on the
drive shaft.
3. Remove the worn brush.
4. Place a new side brush onto the drive shaft
and secure with the cotter pin.
ELECTRIC MOTORS
Check the side brush motor(s) brushes every 500
hours of operation. Replace the motor brushes
when they are worn 9 mm (.375 in).