User's Manual

LE940B6 Hardware User Guide
1VV0301331 Rev. 1.8 - 2017-03-15
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
37 of 104
J20
USB_SS_TX_M
If not used, connect to a test
point or a USB connector
AH19
C103/TXD
If not used, connect to a test
point
AF19
C104/RXD
If not used, connect to a test
point
AA18
C105/RTS
If flow control is not used,
connect to GND
AK19
C106/CTS
If not used, connect to a test
point
AB19
TXD_AUX
If not used, connect to a test
point
AD19
RXD_AUX
If not used, connect to a test
point
AD1
ANT_1
If not used, connect to a 50 Ohm
termination
AU9
ANT_DIV_1
If not used, connect to a 50 Ohm
termination
S1
ANT_GPS
If not used, connect to a 50 Ohm
termination
E4, F3, F5, G2, H3, J2, K3, L2, M3, L4, N4, R4,
T4, V4
For Analysis
Recommended to connect to
test
points for analysis