Datasheet

Acquire the Sign
al
To set up bus parameters:
1. Push B1 or B2 to bring up the lower-bezel
bus menu.
2. Push Bus. Turn multipurpose knob a to
scroll through the list of bus types and select
the desired bus: Parallel (MSO2000B series
only), I
2
C, SPI, CAN, RS-232, or LIN.
B1
Parallel
Dene
Inputs
Thresholds B1 Label
Parallel
Bus
Display
Event
Table
The actual menu items shown will depend on
your model oscilloscope and the application
modules installed.
3. Push Dene Inputs. The choices depend
on the selected bus.
Use the side-bezel buttons to de ne
parameters for the inputs, such as speci c
signals to an analog or digital channel.
Dene
Inputs
If you select Parallel, push the side-bezel
button to enable or disable Clocked Data .
Clocked
Data
Yes|
No
Push the side-bezel button to select the
Clock Edge on which to clock data: rising
edge, falling edge, or both edges.
Clock
Edge
Turn multipurpose knob a to select the
Number of Data Bits in the parallel bus.
Number of
Data Bits
(a) 16
Turn multipurpose knob a to select the
desired bit to dene.
Turn multipurpose knob b to select the
desired analog or digital channel as the
source for the bit.
Dene Bits
(a) Bit 15
(b) D15
MSO2000B and DPO2000B Series Oscilloscopes User Manual 51