User's Manual

The glass is too hot.

Remove the cookware and

let the glass cool down.

There is an L in the indicators and the touch control panel does not respond

The control panel is locked.

Follow the instructions in

the manual on how to

unlock the control panel.

A heating element goes off and the message E2 appears

When cooking at a level below 9, there are fluctuations in the power

The induction generator of

the cooker turns on and off

alternately in order to keep

the chosen cooking level.

This is not a defect.

Problem Possible cause Solution

Cookware is not thick enough

or it is not one piece. The

buzzing is caused by the

transmission of energy

directly to the base of the

cookware.

This buzzing is not a defect.

However, if you want to pre-

vent it, slightly reduce the

chosen power level or use

cookware with a thicker base

and/or that is one piece.

There is a buzzing sound at the beginning of cooking in the induction zones