User's Manual

account the time passed up until that point.
Example:
You are cooking on a heating element and
you have chosen power level 1 (48
seconds of fast heat-up) and after 30
seconds you change to power level 4 (312
seconds). The remaining automatic boost
time will be 282 seconds (312 seconds
minus 30 seconds).
The fast heat-up function will stop if the
cookware is taken off the heating ele-
ment. If the cookware is once again pla-
ced on the heating element (10 minu-
tes), the fast heat-up function will res-
tart where it left off.
It is not possible to activate the fast heat-
up function on the heating elements if the
Power function is activated.
DISCONNECTING THE FAST HEAT-UP
FUNCTION
Once 10 seconds have passed after the
fast heat-up function has been activated:
1 Choose the heating element. The
corresponding decimal point must be on
(16).
2 Touch the slider cursor (2) to a lower
level.
The fast heat-up function will be automati-
cally deactivated and the heating element
will stay on at a constant power level.
Keep warm function
(models IRX… and IQX...)
By using this function, it is possible to keep
the food warm that is inside cookware pla-
ced on a cooking zone.
1 There is cookware on one of the heating
elements at a previously chosen power
level.
2 Touch the sensor (15) and the
symbol will appear in the indicator.
To disconnect this function, just change
the power levels after selecting the heating
element. This function has a maximum
operation time after which the hob will turn
disconnect.
Power Function
(only models IRX… and IQX...)
It is possible to concentrate additional
power in the induction cooking zones (see
values indicated with an * in the Introduc-
tion section) by using the Power function.
1 Choose the desired cooking zone by
using the corresponding sensor button
(3).
2 Touch the Power sensor button (6).
The power level indicator will show the
symbol P.
The Power function has a maximum dura-
tion of 10 minutes. After this time, the
power level will automatically adjust to
power level 9.
Each side of the cooker has an induction
generator that works with a maximum
power of 3,600 watts. Therefore, the
Power function cannot be used at the
same time on two induction elements that
are on the same side. In other words, if the
Power function is activated on an induction
element on the left side, the Power func-
tion can only be activated on another
induction element that is on the right side.
Once the Power function has been activa-
ted on one induction element, the other
GB
25