Installation Instructions

BAP-1 manual
1. Connect the supplied 5V
1.5A
switching adapter to USB port
as power
supply to unit as well as charging up the internal Li
battery.
2. Long press power on/of
f button (marked 4)
2 sec to switch
on unit. Long press again 2 s
ec to switch off.
3. Short
press fan button (marke
d 5) to adjust fan speed. The
LED intensity will change accordingly with each press. Higher
intensity means higher speed.
4. Short pr
ess sweeping button
(marked 1) to change the wind
sweeping function on and of
f. LED will light up when it is ON.
5. Short pr
ess night light button (marked 2) to swit
ch between
night light mode and PM2.5 indication mode. LED will light up
when night light mode is ON.
6. Short
press music button to switch lullaby playing on or off.
LED will light up when lullaby playing is ON.
7. Follow fig 2 to take out the bottom cover for filter
replacement. Install back bottom cover afterwards.
8. Follow Bebcare Air app for functions that can be controlled
via
the app.