Installation Guide Part 2
Table Of Contents
- Technician Operations
- Getting Started
- Testing Alarms
- Configuring the Entry/Exit Delay Periods
- Configuring the Alarm Transmission Delay
- Configuring the Swinger Shutdown Feature
- Resetting the TouchScreen to Factory Defaults
- Checking for New Firmware Updates for the TouchScreen
- Enabling Fire Alarm Verification
- Managing the Physical Devices in the Security System
- Managing Sensors & Zones
- Appendix A: General Concepts of the Security System
- Appendix B: TouchScreen Placement Options
- Appendix C: General Info for Sensor Placement
- Appendix D: Installer Quick Reference (SIA)
62
8. Tap each sensor icon to configure it.
The details that are available for configuration vary based on the type of sensor being
configured.
See Adding Sensors to the Security System on page 22
To modify a text field such as the Zone Label, tap the field to display a keyboard.
9. When all the sensors are properly configured, tap Next in the Configure Wireless Sensors screen.
Deleting Sensors
To delete a sensor to the security system:
1. Contact Customer Care to get the Premise Passphrase for the current customer’s account.
2.
From the Installer Settings Menu, tap Sensors & Zones ® Delete a Sensor/Zone.
The Premise Passphrase keyboard screen is displayed.
3. Enter the customer’s Premise Passphrase and tap Done.
An icon for each monitored sensor is displayed.
Home System Installation Guide