User's Manual

Flying Angel 3G Wireless Data Card
User Manual
7 Updated 03/2009
Blinking Green
The device has detected a GPRS/EDGE (2G) wireless
network, and is ready to connect.
Green
The device has connected with a GPRS/EDGE (2G)
wireless network, and is sending or receiving data.
Blinking Blue
The device has detected a 3G wireless network
(WCDMA/HSDPA/HSUPA), and is ready to connect.
Blue
The device has connected with a 3G wireless network
(WCDMA/HSDPA/HSUPA), and is sending or receiving
data.
Red
Warning: a SIM card has not been installed in the
Flying Angel, or the SIM card is not properly seated in
the SIM card slot.
Follow the instructions in Chapter 2 to make sure
your SIM card is properly installed.
1.4.2 Before using the Flying Angel 3G Wireless Data
Card
Before you can use the Flying Angel 3G Wireless Data Card for the first time you must:
1. Correctly insert a SIM Card into the device (card purchased separately).
2. Optional: Correctly insert a microSD memory card into the device (card purchased
separately). The microSD card is only required if you plan to store files, photos, music
and video on the device. The Flying Angel does not require a microSD memory card to
connect to the Internet.
3. Connect the device with your PC.
4. Make sure you have an active account with a wireless service provider.