Installation Sheet

1.0

Installation Instructions for

Chara 12, 17 and 26 Outdoor Wall

700OWCHA12, 700OWCHA17, 700OWCHA26

920OWCHARA

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

This product is suitable for wet locations.

These fixtures are intended to be installed

utilizing NEC compliant junction boxes.

This product can be dimmed with most ELV, TRIAC, or 0-10V

dimmers.

This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

OUTDOOR

7400 Linder Ave, Skokie, 60077IL

847.410.4400

www.techlighting.com

Visual Comfort Group

PAGE 1
920OWCHARA Installation Instructions for Chara 12, 17 and 26 Outdoor Wall 700OWCHA12, 700OWCHA17, 700OWCHA26 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. OUTDOOR GENERAL PRODUCT INFORMATION: Use minimum 90°c supply conductors. This product is suitable for wet locations.
PAGE 2
Install the Fixture 1A JUNCTION BOX #8-32 SCREW 7 DRIVER 8 MOUNTING PLATE 9 ALLEN WRENCH & SET SCREW 11 1 With the provided Allen wrench, remove the set screws both sides of the fixture base. 2 Remove the mounting plate from the fixture base 3 Install the mounting plate to the junction box with the two #8-32 screws provided. 4 Connect the black driver wire to the black fixture wire with a wire nut. 5 Connect the red driver wire to the red fixture wire with a wire nut.