Manualshelf

Installation Sheet

ManualsBrandsTech Lighting ManualsPendantsTech Lighting Diz 1 Light Monopoint 12v Bowl Shaped Pendant with 4" Round Canopy and Clear Glass Shade
1234
2
Keep pushing the coaxial cable into the connector while
rotating the connector to ease feeding the inner wire
into the tip of the connector. The outer wrapped wire
will start wrinkling while being inserted another ½" into
the connector.
WRINKLE ON OUTER
WRAPPED WIRE
INNER WIRE STOPS HERE
Look into the sight hole on the top of the connector to
make sure that the inner wire is contacting the end of
the connector.
Hold the coaxial cable in place and tighten the #6-32 set
screw on tip of the connector with the provided 1/16
Allen wrench. Make sure that this set screw
connection is tight.
SIGHT HOLE
INNER WIRE
1/16 ALLEN WRENCH
Tighten the #6-32 oval head set screw on the conical
connector firmly.
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
1E
7
8
9
7
8
9
1G
10
10
1H
11
11
1F