Installation Guide

1.6

Installation Instructions for

DJ-Telescope

700DJTELC

920DJTELE

GENERAL PRODUCT INFORMATION:

This product is suitable for indoor dry locations only.

Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round

Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors,

Backlight Shield, Louver Lend Holder, Snap Louver Holder,

Eggcrate Louver, and Glass Lens are the compatible

accessories and optical controls.

DISPLAY JACK

Installing the Lamp

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Use MAX 75 Watt, MR16 Front Cover Halogen

Lamp.

Push the MR16 lamp pins all the way into the socket

pins.

NOTE: Use only your fingers and a soft cloth to

replace the lamp.

LAMP PIN

SOCKET PIN

Hook one end of the lamp holder spring (provided with

the package) onto front of the lamp. Wrap the spring

over the slot in the middle of the socket and hook the

other end onto front of the lamp.

HOOK IT HERE

MR16 LAMP

LAMP HOLDER

SPRING

SLOT IN THE MIDDLE

OF THE SOCKET

PAGE 1
920DJTELE Installation Instructions for DJ-Telescope 700DJTELC 1.6 1E DISPLAY JACK GENERAL PRODUCT INFORMATION: This product is suitable for indoor dry locations only. Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Lil Egypt, Lil Wok, Barndoors, Snap Barndoors, Backlight Shield, Louver Lend Holder, Snap Louver Holder, Eggcrate Louver, and Glass Lens are the compatible accessories and optical controls.
PAGE 2
Installing the Separator IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, exposure to excessive UV radiation, or injury to person: 2A FIXTURE WIRES – Use this fixture indoors only. – Do not look directly at the lighted lamp. – Do not remain in light if skin feels warm. SEPARATOR 1 – Risk of fire: Use only the type of lamp and maximum wattage indicated in this instruction manual.