Installation Sheet

1.1

Installation Instructions for

700BLT38, 700BLT48

920BELTERRA

CHANDELIER

Belterra 38 and 48 Chandelier

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

Two Person Installation Recommended

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

These fixtures are intended to be installed

utilizing NEC compliant junction boxes.

This product can be dimmed with most ELV or TRIAC dimmers.

This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, 60077IL

847.410.4400

www.techlighting.com

Visual Comfort Group

PAGE 1
920BELTERRA Installation Instructions for Belterra 38 and 48 Chandelier 700BLT38, 700BLT48 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. CHANDELIER Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: Two Person Installation Recommended This product is suitable for damp locations.
PAGE 2
Install the Fixture 1A CANOPY 4 HALF BALL/ UPPER STEM N H MOUNTING PLATE 7 #8-32 SCREW N H STEM ASSEMBLY 5 DRIVER 5 ALLEN WRENCH CANOPY FIXTURE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ALLEN SCREW Remove all the Allen screws using the provided Allen Wrench. Remove the mounting plate and drivers from the canopy. Secure the mounting plate to the electrical box with the #8-32 screws. Feed the half ball/upper stem assembly through the top of the canopy.