User's Manual

bluetooth

This display means the Bluetooth device is not

powered.

1. Press and hold "BT" source button for 3

seconds to power the Bluetooth on.

This display means the touch panel is ready

to pair with your Bluetooth device.

2. Search Bluetooth setting on your mobile

device for "TeachLogic".

Each Touch Panel has a unique Serial Number

on the panel display.

Look for SN:TeachLogic-00000XXX and pair that

number with your device.

This display indicates that your mobile device and

Touch Panel are in the pairing process.

This display indicated your device and the Touch

Panel are paired.

**Please note that your device will also control the

volume.**

Bluetooth will automatically power o󰀨 if no signal

is received after about 10 min.

To connect a di󰀨erent Bluetooth device, hold "BT"

source button for 3 seconds and all "BT" action

will be stopped.

After completing this step, another moble

Bluetooth device can be connected

to the TeachLogic CPS-120 or CPR-125 touch

panel.

Pairing a Bluetooth moble device to CPS-120 or CPR-125 Touch Panel