User's Manual

transmitterSpecifications
Maxim III
17
Infrared FM
FM Wide-band
Ch. A: 2.08 MHz | Ch. B: 2.54 MHz
850 nm
32.768 KHz
50 µs
50 Hz - 13KHz, ± 3dB
›65 dB
‹1% @1KHz
± 10 KHz
± 25 KHz
Two, RCA
Four line level inputs for DVD,
Computer, Aux and MP3
Switchable computer anti-hum circuit
Aux input (Microphone or Line level)
One Lesson Capture Output, 3.5mm with
Gain Control, Front Panel
One ALS Output, 3.5mm with gain con-
trol, Rear Panel
Five Band ±12dB
N/O, N/C contact closures
Wall panel control of line input levels
Fire Alarm Panel - Contact Closure
Two Ampliers, 50 watts total (RMS),
25 watts ea. 4
4 ohm min, per channel
One Phoenix Connector, ch A & B
19VDC /3.4A / 65W CE,CSA & UL Listed
8 ½" W x 1 ¾" H x 7 ½" D
2 lb. 4 oz.
Steel
Receiver Input
Modulation
Reception Frequencies
Infrared Wavelength
Pilot Signal
De-emphasis
Frequency Response
S/N Ratio
THD
Nominal Deviation
Maximum Deviation
External Sensor Input
Aux Inputs
Line Output
Equalization
Security Alert Output
RS-232
Fire Alarm Input
Power Output
Speaker Impedance
Output Connection
Power Supply
Dimensions
Weight
Enclosure
Maxim III (IMA-520) specs.
power supply (AC-36) specs.
Regulated Switching Power Supply
100–240 volts AC, 47–63Hz
19 volts DC, 3.43A
65 watts Max.
Type
Input Voltage
Output Voltage
Power Output