Datasheet
All specifications subject to change. Consult TE Connectivity for latest specifications.
PAGE 1
MCON
TAB AND RECEPTACLE CONTACTS
MCON INTERCONNECTION SYSTEM
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY & SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY & CHASSIS SYSTEMS
4
4
4
4
4
* MCON 0.50, MCON 1.2, MCON 2.8 and MCON 6.3
– same level for locking lance and secondary feature
** Except MCON 0.50 – clean body version
*** -40° C to 180° C with innovative surface technology available
MCON is a series of contact systems commonly used
for electrical and electronic applications for passenger
cars and commercial vehicles. The contact design
meets standardized blade sizes and interface
requirements of the automotive industry.
Except the miniaturized MCON 0.50 contact system,
all contacts follow the two-piece contact design
strategy to separate the electrical from the mechanical
performance.
The MCON contact series is available for sealed and
unsealed applications. For a fast and economic
termination process, TE Application Tooling is oering
a vast portfolio of application equipment.
The MCON advantages:
n High performance copper alloy
n Redundant contact point technology
for higher reliability
n High vibration level support to meet
future requirements
n Overstress protection of the contact springs
n Contact box with polarization
and secondary locking feature*
n Protected locking lance**
n Sealed and unsealed version
n -40° C up to 150° C temperature range***
n 3 directional secondary locking access