Information

105
Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
Application Tooling (Continued)
FASTON Terminals (Insulated and Uninsulated)
Application Tooling
Optional Stripping
Module for the AMP-3K/40,
AMP-5K/40 and
AMP-O- LECTRIC Model G
The combination of the
stripping module with
the AMP-O-LECTRIC
model G terminator or the
AMP 3-K/40, AMP 5-K/40
provides an economical,
proficient method of
stripping wire and crimping
terminals on the same
machine. Wires are stripped
moments before crimping,
meaning there is virtually no
chance of damaging wire
conductors during handling
or storage. Once the wire is
fed into the start sensor the
stripping module does the
rest, improving placement
accuracy.
For more information, request
Catalog 1309085.
Crimp Quality Monitor
(CQM)
Product Features
■ Real-time monitoring of
every crimp
■ Effective for monitoring
the wire barrel crimp of
open barrel, uninsulated
contacts and terminals
■ Calculation and display of
actual crimp height, force
and position graphs
■ Touch screen graphical
user interface
■ Network access with web
interface
■ Automatic adjustment of
crimp height on enabled
terminators
■ Multiple language
support
Crimp height is the
accepted method for the
most accurate and precise,
non-destructive testing of
crimp quality. The Crimp
Quality Monitor is a
convenient, automatic,
easy-to-use tool for
measuring crimp height as
part of a comprehensive
quality management
program.
On-screen programmability
allows flexible determination
of crimp parameters and
quality ranges. These
monitors are compatible with
several machines, including
the AMP-O-LECTRIC model
G terminating machine and
the 3K/40 and 5K/40
terminators.
The TE CQM units utilize a
technology which is
constantly measuring both
ram position and force
throughout the crimp cycle.
As many as 3,000 data
points are gathered at a
5kHz sampling rate and
analyzed on every crimp in
real time. The CQM then
compares the measured
force/displacement curve to
the base line to ensure that
the forces and distances
are within specification,
thereby indicating a good
crimp. Other systems make
a force vs. time
measurement.
For more information, request
Catalog 82275.
AMP-TAPETRONIC Machine,
Part Number 69875
The AMP-TAPETRONIC
machine is an
AMP-O-LECTRIC model “K”
terminating machine with
a permanently-mounted
applicator that accepts
interchangeable die sets
to apply a variety of tape-
mounted terminals and
splices. Many of the die
sets can also be used in
AMP-O-LECTRIC
terminating machines with
a tape applicator.
For more information, contact TE.
Note: All part numbers are RoHS
compliant.