Information

163
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors .250 [6.35] Centerline
Standard Density
Performance Characteristics
The Universal MATE-N-LOK Connector
performance characteristics found on
pages 163-164 are based on free-hanging
and panel mount connectors, loaded
with contacts crimped on stranded wire.
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Insertion Force—
5.0 lb. max. per contact
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Facts
■ Pins and sockets can be
intermixed in the same
housing
■ Positive polarization
■ Rear cavity identification
■ Contacts completely
enclosed in housings
■ Positive locking housings
■ Insulation capability to .200
[5.08] diameter
■ Removable, crimp snap-in
contacts
■ Low contact mating force
■ Contacts accept 30-10 AWG
[.05-5.0 mm
2
] wire sizes
■ Contacts available with pre-
tin or gold plating
■ Dual locking lances provide
optimum contact stability
■ Panel mount or free-hanging
■ Mate with Universal
MATE-N-LOK II Housings
■ Available in UL 94V-O flame
retardant material. Meets
the material requirements of
table 25.1 of U.L. Standard
1410 (television receivers
and video products)
■ Not for interrupting current
■ Harness to PC Board capa-
bility using pin or socket
headers
■ Pin and socket headers are
available in both vertical and
right-angle style
■ Solderability— headers meet
MIL-STD 202 Method 208
■ Contacts are on .250 [6.35]
centerline spacing
■ Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■ Certified by Canadian
Standards Association,
File No. LR 7189
■ Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
R
R
Technical Documents
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
PC Board Headers
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-7714 Plug, Cap, Headers, Pin,
Socket and Accessories