Information

CPC
Series 1
18
Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Signal Contacts (Continued)
Material and Finish — See chart.
Contact Body—Copper Nickel Alloy
Retention Spring—Stainless steel
Related Product Data
Application Tooling — Pages 76-79
Technical Documents
114-10004 Application Specification
108-10024-2 Product Specification
Enhanced High Current
Type III+, Crimp, Snap-In
Ratings
Multiplication Rating Factor (F)
Pin
Socket
[.0625
+.0010
–.0020
[1.588
+0.025
]
–0.051
Dia.
Max.
Dia.
Pin Body
Spring, Stainless Steel
Spring,
Stainless Steel
Ferrule, Brass,
Nickel Flash
.530
±.010
[13.46
±0.25
]
.113
[2.87]
.390
[9.91]
Min.
Contact Size 16—Pin Diameter .062 [1.57]
Wire Size
Ins.
Contact
Strip Form Loose Piece Tooling Part No.
Range
Dia.
Finish
Contact No. Contact No.
Loose Piece Strip Form
AWG mm
2
Range
Pin Socket Pin Socket Hand Tool Applicators
466326-
□
***
.080-.100
1
Gold 1-66359-6 1-66358-9 1-66361-4 1-66360-4
91519-1
3
or
18-14 0.8-2.0
2.03-2.54
Tin 1-66359-9 2-66358-1 1-66361-6 1-66360-6
466923-2***
.110-.150
2
Gold 1-66597-0 1-66598-1 66602-9 1-66601-0
466958-1***
2.79-3.81
Tin 1-66597-1 1-66598-2 1-66602-0 1-66601-2
91521-1
3
or
567364-
□
***
Socket
Pin
1
Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
2
Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
3
To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly,
order SAHT Adapter
Part No. 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and
Power Unit
Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
*** Call Technical Support for Automatic Machine Applicator Part Numbers.
Voltage: 250 Volts AC/DC
600 Volts AC/DC, Series I, VDE tested and select loaded only
Base Current: Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire
Enhanced High Current Type III+ contacts: 25 amperes, 30˚C temperature rise with single contact on 14 AWG wire
Temperature: -55˚C to +105˚C
VDE 0627: XA/630/4KV/2 - Series I, VDE tested only
Type III+ Contacts (Note: 1 = 17 amperes)
Single Circuit ≅ 50% 100%
Shell Size Wire Size Wire Size Wire Size
30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG
11-4 .291 1 .212 .905 .140 .684
13-9 .278 .995 .175 .750 .134 .567
17-16 .270 .990 .146 .625 .127 .472
23-24 .281 .985 .138 .550 .120 .416
23-37 .275 .985 .131 .497 .114 .376
Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes)
Single Circuit ≅ 50% 100%
Shell Size
14 AWG 14 AWG 14 AWG
11-4 .880 .840 .640
13-9 .880 .640 .480
17-16 .880 .520 .400
23-24 .880 .520 .400
23-37 .880 .440 .320
Percent Connector Loading
Percent Connector Loading