Information

15
Catalog 65910 Dimensions are in inches and Dimensions are shown for Technical Support
Revised 7-07
millimeters unless otherwise reference purposes only. USA: 1-800-522-6752 Central America: 52-55-5-729-0425
specified. Values in brackets
Specifications subject to change.
Canada: 1-905-475-6222
South America: 55-11-3611-1514
are metric equivalents.
Mexico: 01-800-733-8926
www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
15
Signal Contacts (
Continued)
Material
Pin Body—Brass
Socket—Phosphor bronze
Contact Finish
A—Select gold flash over nickel
on entire contact, with additional
.000030 [0.00076] gold on
mating end
B—Duplex plated .000030
[0.00076] gold on mating end, tin
on termination end, with entire con-
tact nickel underplated
C—Gold flash over nickel on entire
contact
D—Duplex plated gold flash on
mating end, tin on termination end,
with entire contact nickel underplated
Insertion/Extraction Tool Part No.
91285-1
Instruction Sheet—408-9404
This tool includes interchangeable tips
to Insert/Extract:
Size 22, 28-22 AWG [0.08-0.03mm
2
]
Crimp Contacts
Size 20, 28-20 AWG [0.08-0.6mm
2
]
Crimp and Solder Cup Contacts
Size 20, Posted Contacts
P
in
Socket
Socket
Size 20 DF, Crimp, Snap-In
Contact Size—20
Pin Diameter—.040 [1.02]
*See Product Spec 108-40005
.085
[2.16]
Dia. Max.
.085
[2.16]
Dia. Max.
.390
[9.91]
.370
[9.34]
.555
[14.1]
.575
[14.61]
[.0400
±.0015
[1.02
±
0.034
]
Dia.
Localized Gold Plate Area
Localized Gold Plate Area
.150
[
3.81]
.055
[1.40]
Min.
Contact Part Nos.
Tooling**
Color
Wire Ins. Contact
Pin Socket
Code
Size Dia. Finish
Strip Form Hand
(Loose
Range Max. Code
Strip Form Loose Piece Strip Form Loose Piece
Applicator
††
Tool
Piece)
A 66507-3t 66507-9t 66505-3t 66505-9t
.040
B 1658540-1t 1658540-5t 1658538-2t —
466423-
□
††
t
Blue
28-24
1.02
C 66507-4
t 1-66507-0t 66505-4t 1-66505-0t
or 466901-1
††
t
91503-1
†
t
Dot
AWG
D
1658540-5
t 1658540-2t 1658538-3t 1658538-1t
or 1016015-1
††
t
[0.08-0.2
A 66682-2
t 66682-4t 66683-2t 66683-4t
466758-2
††
t
mm
2
]
.060
B
5066682-9
t —
1-5066683-0
t —
or 466963-1
††
t 91549-1
†
t
Black
1.52
D
5066682-6
t —
5066683-7
t —
or 567804-1
††
t
Dot
26-22
A 745254-2t 745254-6t 745253-2t 745253-6t
AWG .050
B 1658544-2t 1658544-1t 1658543-2t 1658543-1t
466968-1
††
t
Yellow
[0.12-0.4 1.27
C 745254-3
t 745254-7t 745253-3t 745253-7t
or 567036-
□
††
t
91525-1
†
t
Dot
mm
2
]
D 1658544-3
t — 1658543-3t —
or 567849-1
††
t
24-20
A 66506-3t 66506-9t 66504-3t 66504-9t
466422-
□
††
t
AWG .060
B
1658539-1
t 1658539-3t 1658537-3t 1658537-4t
or 466900-1
††
t
Red
[0.2-0.6
1.52
C 66506-4
t 1-66506-0t 66504-4t 1-66504-0t
or 567801-1
††
t
91503-1
†
t
Dot
mm
2
]
D
1658539-2
t 1658539-4t 1658537-1t 1658537-2t
or 1016002-1
††
t
†To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT)
Assembly, order SAHT Adapter
Part No. (Call Technical Support at 800-522-6752), Adapter Holder Part No. 356304-1
(with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
††For complete information on AMP Strip Form Applicators for fully automatic and semiautomatic machines,
contact Technical Support: 1-800-522-6752.
Note: Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool for Wire Size 28-24 AWG [0.08-0.2mm
2
]
(Ins. Dia. Max. .040 [1.02]), and Wire Size 24-20 AWG [0.2-0.6mm
2
] (Ins. Dia. Max. .060 [1.52])—Part No. 58448-2.
Note:
Die Set Part No. 58448-3 can be adapted for use with the 626 Pneumatic Tool System.
**
There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric
Terminator on page 30.
Note: All part numbers are RoHS compliant except: t Indicates non-RoHS compliant.
Pin
W
ith Insulation Support