Datasheet

140
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
Note: All part numbers are RoHS compliant.
Cable Connectors
Unshielded Cable Clamps (Continued)
Straight/90° Exit Cable
Clamps can be used on a
plug or receptacle and will
not interfere with commonly
used mating hardware. Their
three-piece construction
a
llows easy assembly to
a cable harness. Also,
the same cable clamp
components are used for
both straight and 90° cable
exit applications. This is
accomplished by simply
positioning the Male and
Female Panels on the Yoke
for the desired angle.
Material
Black thermoplastic
Related Product Data:
Connectors used with:
HDE All-Plastic—pages 112 & 113
HDE Metal-Shell—pages 114 & 115
HDP Metal-Shell—pages 90-102
Other accessory capabilities:
Female Screwlocks—page 148
Locking Posts and Slide Latches—
pages 149-151
Latching Blocks—pages 153 & 154
.820
[20.83]
B
A
B
A
.
820
[20.83]
HDE or HDP
Plug or Receptacle (Ref.)
S
traight Cable Exit
Application
90° Cable Exit
Application
Typical Cable Support Gate
(Supplied with Cable Clamp Kit)
Shell Size
Cable Clamp
Dimensions
Cable
Cable Clamp Kit No.
Configuration
AB
Dia.
Individual
Straight Exit 1.906 1.672
3
90° Exit 2.066 1.396
.550 745306-1
Straight Exit 2.424 1.820
4
90° Exit 2.638 1.596
.750 745311-1
Notes: 1. All parts are packaged unassembled.
2. Each cable clamp assembly includes a yoke, male panel, female panel and four cable support gates.
The cable diameter is adjustable by changing the cable support gates.
Straight/90° Exit