Information

Basic Part No. 188275
Micro-MaTch Miniature Connector System
Female-on-Board Connector
Surface Mount Device (SMD)
Notes:
1. To enable automatic Pick & Placement, connectors
are always packed in embossed tape according
EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel
with a diameter of 330 mm.
3. Connectors are supplied with or without a feature
for vacuum Pick & Placement.
4. For this connector no additional solder hold down
is required.
8
All specifications subject to change. Consult Tyco Electronics-AMP for latest design specifications.
No. of Positions Dimensions mm Part Numbers
ABWithout vacuum tape With vacuum tape
4 3.81 7.1 1-188275-4 7-188275-4
6 6.35 9.7 1-188275-6 7-188275-6
8 8.89 12.2 1-188275-8 7-188275-8
10 11.43 14.7 1-188275-0 8-188275-0
12 13.97 17.3 1-188275-2 8-188275-2
14 16.51 19.8 1-188275-4 8-188275-4
16 19.05 22.4 1-188275-6 8-188275-6
18 21.59 24.9 1-188275-8 8-188275-8
20 24.13 27.4 2-188275-0 9-188275-0
1.6
1.27
A=(N-1)*1.27
TAPE FOR
VACUUM P&P
0.5B-2.5
5.0
"B"
5.0
7.0
MINIMUM SOLDERPATHLENGTH 3.00
1.27
0.1
2.54
1.50
1.50
"A"
RECOMMENDED
PCB LAY-OUT
TOP VIEW
This SMD connector version is designed for standard reflow and infrared
solder processes ("FULL SMD"). Polarization is accomplished by the
housing, therefor no polarization holes in the PC Board are required.
The contact is designed with an additional spring to compensate for
differences in thermal expansion between housing and PCB. Due to this
feature, tension on solder joints is prevented.