Information

Specials
Micro-MaTch Miniature Connector System
Specials
- SMC connector - Locking Latch - In-board SMD - Male SMD -
SMC connector: 100411
This connector type enables a solderless application to the printed
circuit board. Contact is made on the surface of the PCB, enabling
the use of paperphenol and expoxy boards with both drilled and
punched holes. This connector is suitable for both Wire-to-Board
as Board-to-Board connections. Because this connector is mounted
on the solderside, the components of both PCB’s in a parallel
Board-to-Board application, will be in the same direction. By
this, the stacking of two or more PCB’s is possible. Application
tooling available on request.
Locking Latch: 338068/338069/338070
For Wire-to-Board applications this feature provides an audable
click during mating. This feature is available for the standard
Micro-MaTch female connectors. Cross reference is made by base
partnumber: x-338068-x instead of x-215079-x, x-338069-x
instead of x-188275-x and x-338070-x instead of x-215460-x
(standard large reel packaging only).
In-board SMD: 188431
This connector is only tooled in 20 position (9-188431-0) and
packaged in embossed tape according to EIA481 standards.
The connectors are equiped with a feature for vacuum Pick &
Placement. It enables the mounting of a PCB with the solderside
direct behind e.g. a display. It is also possible to obtain a parallel
BTB application with an extreme low PCB distance of 4.2 mm.
Male SMD: 338728
This connector enables the possibility to have a full SMD to SMD
Board-to-Board application. It mates with all Micro-MaTch
female connectors, and will be packaged according EIA 481
standard. Consult Tyco Electronics-AMP for more information.
13
All specifications subject to change. Consult Tyco Electronics-AMP for latest design specifications.