Information
Crimping Presses and Accessories
Timer Interconnection System
Application Tooling and Equipment
Catalog 889759-3
Revised 7-2011
All specifications subject to change. Consult TE Connectivity for latest specifications.
2-200
For more detailed information please visit our websites:
www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china
Both machine versions permit
the cost effective manufac-
turing of crimp connections
with a high production
efficiency. The CRIMPMATIC
970 machines are cabable
of processing wires of up to
approx. 16 mm
2
(AWG 5),
depending on the terminal
stock thickness.
■ Compact, space-saving
design
■ Compatible with MQC
Applicators
■ Step mode during set-up
CRIMPMATIC 970 and
971 Crimp Presses for
Reeled or Loose-Piece
Terminals
The CRIMPMATIC 971 machine
is capable of processing
wires of up to approx. 50 mm
2
(AWG 0), depending on the
terminal stock thickness. The
machines can be equipped
with a quick change device
for power crimp tools.
MQC Applicators with a lower
dead center of 135.78 mm
can be mounted by means
of an adapter plate. These
machines can be utilized as
manual work stations and
can be integrated into fully-
automatic processing lines.
The terminator as shown is
a manual work station
CRIMPMATIC 971. The unit
can be supplied with or with-
out crimp process monitoring,
or it maybe retrofitted later.
Options are available upon
request
■ Crimp force monitoring
■ Paper spooler
■ Adapter plate for MQC
Applicator
Applicators
■ Especially designed for
larger wire sizes
■ Pneumatic feed
■ Can be used with both
crimp presses
CRIMPMATIC 970 and
CRIMPMATIC 971