Information

108-2184
3. REQUIREM ENTS
3.1. Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
3.2. Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
3.3. Ratings
! Voltage: 250 volts DC
! Current: See Figure 1 (all readings in am peres)
Connector Loading
W ire Size (AW G)
14 18 20
Single Circuit Energized 16.0 10.0 7.0
All Circuits Energized (12 position connector) 9.0 6.0 5.0
Figure 1
! Tem perature: -40 to 125°C
! Ingress Protection (IP) level: IP67
! Flamm ability: UL94HB
3.4. Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 2. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions.
3.5. Test Requirem ents and Procedures Summ ary
Test Description Requirem ent Procedure
Visual inspection. Meets requirem ents of product
drawing.
Visual inspection of product before
(and after) unm ating connectors for
conditions such as torn seals,
cracked plastic, evidence of fluid or
dust ingress in sealed connector
system s, arcing, charing, m elting,
or anything that affects the
perform ance or serviceability of the
product as deem ed by qualified
Engineer.
Figure 2 (continued)
Rev B 2 of 6