Information

Lead Makers
Timer Interconnection System
Application Tooling and Equipment
Catalog 889759-3
Revised 7-2011
All specifications subject to change. Consult TE Connectivity for latest specifications.
2-188
The Alpha 477 machine allows
the processing of a wide
variety of wire combinations
from a double crimp up to
three different contacts,
two different seals and two
different wire sections.
Alpha 477 Lead Maker
Double Crimp
Connections with
Two Different Wires
The arrangement of six
processing stations plus a
double gripper unit make for
highly diverse processing
possibilities. As a result, the
Alpha 477 machine can grow
and expand to meet your
future needs.
Individual wires with cross
section of 0.22 mm
2
up to
4 mm
2
can be processed.
The maximum total cross
sections of a double crimp
can be as large as 6 mm
2
.
The Alpha 488 machine was
designed for the economical
processing of twisted pairs,
consistently combining as it
does state of the art tech-
nology with proven system
elements like TopWin™
user-interface, the mci 712
or mci 722 crimp module.
Alpha 488 Lead Maker
Processing of Twisted
Pairs
The Alpha 488 machine
creates fully processed
twisted pairs from endless
wire. This automatic twisting
For more detailed information please visit our websites:
www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china
TopWin is a trademark of Komax AG
machine can accommodate
wires with cross sections of
2 x 0.22 mm
2
to 2 x 2.5 mm
2
.
Four stations on side 1 and
two on side 2 make for
flexible processing possibilities
such as double-ended seal
application and crimping.