Information

Crimping Presses and Accessories
Timer Interconnection System
Application Tooling and Equipment
Catalog 889759-3
Revised 7-2011
All specifications subject to change. Consult TE Connectivity for latest specifications.
2-201
For more detailed information please visit our websites:
www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china
This pneumatic crimping
machine features a newly
developed safety mechanism,
and is designed to crimp
connections up to 50.0 mm
2
depending on the terminal
design.
By means of a fitted safety
valve, crimping is not released
where the size of the opening
between the impact surfaces
of the dies exceeds 5.9 mm.
AT-SC
Pneumatic Safety
Crimping Press
Consequently, there is no
need to specify any safety
covers to protect the operator.
The use of a safety double
foot pedal simplifies the
operation while increasing
productivity. This also allows
the hands to remain free to
insert the contacts and
conductors.
This pneumatic crimping
machine was designed for
crimping insulated and
non-insulated terminals from
0.14 mm
2
to 120.0 mm
2
depending on the terminal.
AT-55
Universal Pneumatic
Crimping Press
With the additional of an
optional cutting unit, the
AT-55 crimping machine is
able to cut ribbon cable up
to a width of 30.0 mm as well
as copper conductors up to
max. 28.0 mm diameter .
This series is equipped with a
battery cycle counter. Safety
guards allow crimp terminals
up to a diameter of 25.0 mm.
Larger terminals can be
applied upon request.