Information

Crimping Presses and Accessories
Timer Interconnection System
Application Tooling and Equipment
Catalog 889759-3
Revised 7-2011
All specifications subject to change. Consult TE Connectivity for latest specifications.
2-199
For more detailed information please visit our websites:
www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china
The BT 722 Bench Top Press
is used for the manual crimp-
ing
of contacts. The BT 722
Press is operated from a
touch screen.
The new TopTouch user inter-
face allows jobs to be set-up
quickly and easily. Even
during production set-up, the
machine operator is prompted
to conduct quality measure-
ments. Following the input of
the calculated values in the
user interface, the crimp height
is automatically corrected.
BT 722
Bench Top Press
This prevents errors arising
from the manual setting of the
crimp height.
Only one crimp is needed for
referencing the integrated
crimp force monitoring. This
reduces waste material
consumption and minimizes
set-up time. The quality values
measured during production
are saved and can therefore
always be called up later.
This ensures traceable quality
at all times.
The programmable DigiStripper
(option) is an ideal accessory
to the BT 722 Bench Top
Press. This can be set-up
without any mechanical
adjustment. Thanks to the
functions zero cut and pull
back, as well as the pre-
programmable cutting depth,
the perfect stripping is
ensured.
In order to help you to ensure
that our applicators are placed
correctly in the presses we
recommend this press gauge.
It is possible to have a
misalignment between the
center of the applicator and
the terminator due to the way
they mount in the terminator.
If this happens, a side load is
applied to the applicator
Gauge for Presses
which can lead to pre-mature
wear and/or quality problems
with the crimped terminals.
The use of the gauge is
simple: You install the press
gauge into the press like an
applicator. Then you unlock
the gauge head, on which is
mounted a gauge ring.
A spring in the gauge is now
pressing the gauge head
upwards. The gauge ring
should now fit easily into the
press head. If this is not the
case the applicator ram would
not be in a centred position
and the mounting plate of the
press has to be adjusted.
The special design of the
press gauge base plate allows
free access to the press
mounting plate fixing screws.