Datasheet

141
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
Cable Connectors
Shielded Cable Clamps
Note: All part numbers are RoHS
compliant.
Cable Die Cast Metal-Plated
Grommet Sets
Shell
Dimensions
O.D. Shield Plastic Shield
C
able O.D. No. of Grommets Part
Size
ABCD
(Max.) Kit Numbers Kit Numbers
Range Per Set Number
.200
5.08
5745171-2 5745854-5 ———
1
.215 1.910 .550** .620** .250
1
3
0.86 48.51 13.97 15.75 6.35
5
745171-1 5745854-3 ———
.370 .185-.320
9.40
5745171-5 5745854-1
4.70-8.13
4 747746-1
.225
5.72
5745172-3 5747099-7 ———
.
300
1.545 1.910 .620 .620
7
.62
5
745172-2 5747099-5 ———
2
39.24 48.51 15.75 15.75
.375 .185-.320
9.53
5745172-1 5747099-3
4.70-8.13
4 747746-1
.430
10.92
1-5745172-3 5747099-1 ———
.
280
7
.11
5
745173-5 5745833-9 ———
.350
8.89
5745173-4 5745833-7 ———
2.090 1.920 .680 .620** .430
3
53.09 48.77 17.27 15.75 10.92
5745173-3 5745833-5 ———
.
480
1
2.19
5
745173-2 5745833-4 ———
.530 .255-.470
13.46
5745173-1 5745833-1
6.48-11.94
6 747973-1
.350
8.89
5745174-5 5747100-9 ———
.425
10.80
5745174-4 5747100-7 ———
.500
2.738 1.920 .800 .620
12.70
5745174-3 —— ——
4
69.55 48.77 20.32 15.75
.530 .255-.470
13.46
2-5745174-7 —
6.48-11.94
6 747973-1
.575
14.61
5745174-2 5747100-3 ———
.650
16.51
5745174-1 5747100-1 ———
.375
9.53
5745175-6 —— ——
.450
11.43
5745175-5 —— ——
2.644 1.920 .900 .730
.525 .255-.470
5
67.16 48.77 22.86 18.55
13.34
5745175-4 —
6.48-11.94
6 747973-1
.600
15.24
5745175-3 —— ——
.675
17.15
5745175-2 —— ——
.750
19.05
5745175-1 5747098-1 ———
Straight Exit RFI/EMI Shields
for Jacketed Cable
(Two-Piece)
This RFI/EMI shield allows
cable to be fully prepared
and terminated to the
connector before the shield is
installed. During installation,
the shield of the jacketed
cable is folded back and
compressed into the cable
opening of the RFI/EMI
shield. For greater cable
support and/or shielding
effectiveness, split-ring and
crimp ferrules are available
(pages 143-145).
Material and Finish:
Die Cast Shield—Zinc alloy, plated
bright nickel over bright copper
Metal-Plated Plastic Shield—
Thermoplastic, plated nickel over copper
4-40 Fillister Head Screws and
Hex Nuts—Steel, zinc plated
4-40 Mounting Screws—Steel, zinc
plated
Jackscrews—Stainless steel,
passivated
Related Product Data:
Ferrules—pages 143-145
Connectors used with:
HDE Metal-Shell—pages 114 & 115
HDP Metal-Shell (Tin plated
only)—pages 90-102
Other accessory capabilities:
Spring Latch (Two-Piece)—
page 152
Technical Documents:
Product Specification—
108-40032
Instruction Sheet—408-6609
Cable Clamp Kits with Grommets
Kit Numbers
Cable No. of
Metal-Plated
Shell
Dimensions
O.D. Grommets
Die Cast Shield
Plastic Shield
Size
ABCD
Range Per Set
With Grommets
With Grommets
1.215 1.910 .550** .620** .185-.320
1
30.86 48.51 13.97 15.75 4.70-8.13
4 5748676-1 5748677-1
1.545 1.910 .620 .620 .185-.320
2
39.24 48.51 15.75 15.75 4.70-8.13
4 5748676-2 5748677-2
2.090 1.920 .680 .620** .255-.470
3
53.09 48.77 17.27 15.75 6.48-11.94
6 5748676-3 5748677-3
2.738 1.920 .800 .620 .255-.470
4
69.55 48.77 20.32 15.75 6.48-11.94
6 5748676-4 5748677-4
2.644 1.920 .900 .730 .255-.470
5
67.16 48.77 22.86 18.54 6.48-11.94
6 5748676-5 5748677-5
Notes: 1. All parts are packaged unassembled.
2. Jackscrews must be purchased separately.
3. Split-ring and crimp ferrules are shown on pages 143-145.
4. Shielded cable clamps will not accept connector housings with clinch nuts.
HDE or HDP Plug
or Receptacle
(Shown for Ref. only)
A
B
C
D
1.920
[48.77]
4
-40 Male Jackscrew Kit Nos.: 747784-8 (bulk packed)*†
*
Each part is individually bulk packed for multiple kit orders.
†Slotted for screwdriver use.
** The following dimensions apply to metal-plated plastic
cable clamps: Size 1: C= .570 [14.48], D=.630 [16.0]
Size 3: D =.640 [16.26]