Datasheet

AMP
Terminating Head and Terminating Head,
Terminating Head, Tube Feed Track,
IDC Product
Loose-Piece Feed Track Tape Feed Track and Base
and Seating Station
for Electric Power Unit Only
AMPMODU MTE Connectors — —
856675-1
(Instruction Sheet 408-9759)
MTA
MTA-100
933567-1 853546-1 and 853542-1 (Base)
—
Closed-End
(Instruction Sheet 408-9435) (Instruction Sheet 408-9636)
Receptacles
MTA-156
933568-1 853547-1 and 853542-1 (Base)
—
(Instruction Sheet 408-9466) (Instruction Sheet 408-9637)
3
For drawings or technical data, contact your Tyco Electronics sales engineer or call the Technical Support Center: 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult Tyco Electronics for latest specifications.
Bench Mount
Electric Power Unit
Part Number 931800-1
■ Portable, compact
■ Low noise
■ Semiautomatic operation
■ Foot pedal actuated
■ Feed track options
Specifications
Length — 14 [356]
Width — 7 [178]; 22 [559] with
feed track
Height — 10 [254]
Weight — 12 lb [5.44 kg]
Electrical Requirements — 120 VAC,
60 Hz, single phase, 2 A
Cycle Time — 0.5 s
Application Rates (Typ.) —
900 terminations per hr;
1 100 terminations per hr with optional
Loose-Piece Feed Track; and
1 250 terminations per hr with optional
Tape (Reel) Feed Track (when produc-
ing 6 in [15 cm] jumpers, one 4-pos.
MTA-100 connector each end, discrete
wire)
Notes:
1. Interchangeable terminating heads must be
ordered separately, see page 4.
2. Loose-piece, tube or tape (reel) feed track
accessories are available, see below.
Accessories for Bench Mount Power Units
Loose-Piece, Tube or
Tape Feed Track Options
■ No special setup required
■ Connectors load easily into feed track
■ Simple, spring-loaded pusher feeds
connectors into head
■ Power Units shown for size reference
only
Terminating Head,
Tape Feed Track and Base
Terminating Head and
Loose-Piece Feed Track
Terminating Head, Tube Feed
Track and Seating Station
Part Numbers
Bench Mount Power Units (Continued)
Pistol Grip Hand Tool System
for Insulation Displacement Connectors (IDCs)
Catalog
296176
Revised 02-01