Datasheet

152
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for AMPMODU Headers with ACTION PIN Posts
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Application Tooling for
ACTION PIN Posts
5
Pin headers with
ACTION PIN posts allow
high speed, solderless
back-plane construction
through press-fit applica-
tion. Press fitting connectors
to printed circuit boards
requires special seating
tools which transfer applica-
tion force directly to the
contacts.
Force applied to the tool
to seat the connectors
can be provided by the
Tyco Electronics seating
machines shown on this
page.
For tooling information,
call the Tyco Electronics
Automation Group
1-800-722-1111.
Single-Row Connector
Seating Tools
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
ACTION PIN Post
Replacement Tooling
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Double-Row Connector
Seating Tools
Header Size Tool
(No. of Pos.) Assembly No.
4 91170-1
6 91170-1
8 91170-2
12 91170-5
14 91170-6
16 91170-7
20 91170-9
24 1-91170-1
30 1-91170-4
36 1-91170-7
40 1-91170-9
50 2-91170-4
60 2-91170-9
80 3-91170-2
96 3-91170-5
100 3-91170-6
120 3-91170-8
140 4-91170-0
200 4-91170-2
Triple-Row Connector
Seating Tools
Header Size Tool
(No. of Pos.) Assembly No.
96 91169-8
105 91169-6
120 91169-7
150 91169-3
195 91169-2
204 91169-1
210 91169-5
300 91169-9
Press Model Description
Max Pressing Force Max Board Size (L x W)
tons [kN] in [mm]
BMEP 3T
Semi-automatic, benchtop
3 [26.7] 18 x 24 [460 x 610]
servo-electric press
BMEP 5T
Semi-automatic, benchtop
5 [44.5] 18 x 24 [460 x 610]
servo-electric press
MEP 6T
Semi-automatic, stand-alone
6 [53.4] 24 x 36 [610 x 914]
servo-electric press
MEP 12T
Semi-automatic, stand-alone
12 [106.8] 30 x 36 [ 762 x 914]
servo-electric press
AEP 12T
Automatic, inline
12 [106.8] 36 x 48 [914 x 1219]
servo-electric press
AEP 6T
Automatic, stand alone
6 [53.4] 30 x 36 [762 x 914]
servo-electric press
ASG Servo Electric Presses
Tyco Electronics offers a
wide range of servo-electric
presses for the application
of press-fit connectors.
Systems are available with
varying force capacity,
board size capacity and
process capability. Each
system features real-time
force feedback and PC con-
trol to allow the highest level
of control and traceability.
Every connector pressed is
monitored to confirm that
maximum force is not
exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is avail-
able as each connector
press cycle is monitored
and stored.
Please see the matrix
below and contact
Tyco Electronics Automation
Group at 1-800-722-1111 for
assistance in understanding
which system will best meet
your needs.
BMEP 5T
AEP 6T