Datasheet

ManualsBrandsTE CONNECTIVITY ManualsPCB ConnectorsPin strip Contact spacing: 2.54 mm Total number of pins: 34 1 pc(s)

Ribbon Cable

Interconnect Solutions

TE Connectivity Catalog 82012 Revised 4-12

te.com

82012 LUG Printer ?M 04/2012

TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or

company names might be trademarks of their respective owners.

Ribbon Cable Interconnect Solutions

Summary of content (100 pages)

PAGE 1
TE Connectivity Catalog 82012 Revised 4-12 © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82012 LUG Printer ?M 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. Ribbon Cable Interconnect Solutions te.
PAGE 2
Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide .039" [1.00 mm] Cable Pitch Ribbon Cable Connector Selection Guide .025" [0.64 mm] Cable Pitch Mates to .050" x .100" 2-Row Pin Header Grid Pages 10 and 11 Mates to .100" x .100" 2-Row Pin Header Grid Page 15 Mates to .078" [2 mm] x .078" [2 mm] 2-Row Pin Header Grid Solders to .075" x .
PAGE 3
Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide (Continued) Ribbon Cable Connector Selection Guide .050" [1.27 mm] Cable Pitch (Continued) Mates to .100" x .100" Novo Type Female Socket Connector Pages 48-51 Mates to .100" x .100" 3-Row Eurocard Type C & R See Catalog 82721 Universal I/O Pin Connectors Pages 45 and 46 EUROLATCH Receptacles Page 47 Mates to .100" x .
PAGE 4
Ribbon Cable Interconnect Solutions Introduction Disclaimer While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice.
PAGE 5
Ribbon Cable Interconnect Solutions Introduction (Continued) Mass termination capabilities of the ribbon cable connectors have helped make ribbon cable, and particularly .050 [0.127] centerline cable, popular within the Electronics Industry. The ability to terminate up to 64 conductors simultaneously, without stripping or otherwise preparing the cable, presents obvious labor savings. Ribbon Cable Connectors are wire-to-board devices used to make the transition between cable and pc board circuitry.
PAGE 6
Ribbon Cable Interconnect Solutions Table of Contents Ribbon Cable Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3 .025 [0.64] Centerline Ribbon Cable Connectors System 50 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12 Board-to-Board Connectors . . . . . . . . . . . . . . . .
PAGE 7
Ribbon Cable Interconnect Solutions Table of Contents (Continued) .050 [1.27] Centerline Ribbon Cable Connectors (Continued) DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 4-Row PCB Solder Transition Connectors . . .
PAGE 8
Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors Product Facts ■ Preassembled housing and cover ■ One-step termination ■ End and daisy chain termination ■ Positive end latching of connector to universal header ■ Terminates 30 AWG [0.05 mm2] solid or stranded and 32 AWG [0.03 mm2] stranded .025 [0.
PAGE 9
Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Double Row Receptacle .254 .228 [6.45] [5.79] A .054 [1.37] .430 [10.92] Material and Finish Housing — Black thermoplastic, UL 94V-0 rated Latches — Stainless steel Contacts — Phosphor bronze, plated 30 microinch gold over nickel with tin in termination area .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors .580 [14.
PAGE 10
Ribbon Cable Interconnect Solutions System 50 Board-to-Board Connectors, Through-Hole Headers Shrouded, Double Row Vertical .015 [0.38] .390 [9.91] .025 [0.64] Centerline Ribbon Cable Connectors System 50 Board-to-Board Connectors .055* [1.40] .060 [1.52] 2 Plc. Circuit Identification Feature** A .050 [1.27] Typ. .092 [2.34] .100 [2.54] Material and Finish Housing — Black thermoplastic, UL 94V-0 rated Contacts — Copper alloy, plated .000030 [0.00076] gold in mating area, .000150 [0.
PAGE 11
Ribbon Cable Interconnect Solutions System 50 Board-to-Board Connectors, Through-Hole Headers (Continued) Shrouded, Double Row Right-Angle .100 [2.54] at Post Tips .055* [1.40] .160 [4.06] at Post Tips .540 [13.72] .025 [0.64] Centerline Ribbon Cable Connectors System 50 Board-to-Board Connectors .408 [10.36] Hold down post .060 [1.52] 2 Plc. Circuit Identification Feature** .100 [2.54] A Material and Finish Housing — Black thermoplastic, UL 94V-0 rated Contacts — Copper alloy, plated .
PAGE 12
Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable Paddleboard A .273 [6.93] (Terminated) Material and Finish .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors Housing — LCP thermoplastic, UL 94V-0 rated, black Cover — Polyester, UL 94V-0 rated, black Contacts — Phosphor bronze, plated .000100 [0.00245] min. tin over .000050 [0.00127] min.
PAGE 13
Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.
PAGE 14
Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Related Product Data .420 [10.67] Strain Relief — Part Number 4992521 Mateable Headers — page 15 .492 Max. [12.50] Terminated View 2.186 [55.52] Material & Finish .240 [6.10] Cover Ground Bus Bar Housing Pos. No. 1 Indicator .610 Ref. [15.49] Odd Gnd .025 [0.
PAGE 15
Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Ultra ATA Compatible Headers Universal Headers — Pin 20 Omitted Post Type Housing Material Latch Type Part Number Contact Finish (Plating Code) Vertical Nylon or PBT Long 5111824-9 D Vertical Nylon or PBT Short 6489700-1 B Contact Finish (Plating Code) Solder Tail Length .110 2.79 .123 3.12 Comments PP Legend: PP — Polarization Peg .025 [0.
PAGE 16
METRIC Ribbon Cable Interconnect Solutions Dimensions are millimeters over inches 2.0 mm [.079] Receptacle Connectors .039 [1.00] Centerline Ribbon Cable Connectors .079 [2.00] Receptacle Connectors Product Facts ■ True hard metric 2.0 x 2.0 [.079 x .079] mating grid for 1.0 [.
PAGE 17
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions 2.0 mm [.079] Receptacle Connectors, Non-Polarized and Center Polarized Bar Material and Finish A Housing and Termination Cover — UL 94V-0 rated polyester, black Contacts — Beryllium copper, duplex plated 0.00076 [.000030] min. gold on mating end, 0.00013 [.000005] min. gold on termination end, all underplated 0.00127 [.000050] min. nickel Note: Accepts 0.08-0.09mm2 [28 AWG] ribbon cable, PVC insulated 1.00 [.039] pitch.
PAGE 18
Ribbon Cable Interconnect Solutions AMPMODU 50/50 Grid Connector System Right-Angle Headers, Board-to-Board (Page 24) Vertical Headers, Board-to-Board (Page 21) Receptacles, Cable-to-Board, With Latch (Page 26) Board-to-Board Vertical Receptacles and Headers Vertical Receptacles, Board-to-Board (Page 20) Receptacles, Cable-to-Board Without Latch (Page 26) Vertical Headers, Board-to-Board (Page 21) Vertical Headers, Board-to-Board (Page 21): .250 [6.35] Stack Height .320 [8.13] Stack Height .390 [9.
PAGE 19
Ribbon Cable Interconnect Solutions Board-to-Board Vertical Receptacles and Headers Product Facts ■ Surface-mount R R AMPMODU 50/50 Grid Vertical Headers and Receptacles are designed for parallel board-to-board stacking in high density applications. Right-angle board-to-board and cable-to-board applications are also possible, since the vertical receptacles also mate with non-latching right-angle headers (page 24) and the vertical headers also mate with non-latching cable connectors.
PAGE 20
Ribbon Cable Interconnect Solutions Board-to-Board Vertical Receptacles, Double Row, .050 x .050 [1.27 x 1.27] Centerline A .120 [3.05] .028 [0.71] Material and Finish .050 [1.27] Vertical Receptacles, Double Row Housing—Glass-filled thermoplastic, black, 94V-0 rated Contacts—Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown—Copper alloy; plated .000150 [0.00381] tin over .
PAGE 21
Ribbon Cable Interconnect Solutions Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline .050 [1.27] .225 [5.71] .050 [1.27] A .2255 [5.728] For .250 [6.35] Mated Height .030 [0.76] .050 [1.27] A For .320 [8.13] Mated Height .2975 [7.557] .050 [1.27] .030 [0.76] .050 [1.27] Vertical Headers, Double Row .030 [0.76] A .3675 [9.335] For .390 [9.
PAGE 22
Ribbon Cable Interconnect Solutions Recommended PC Board Layouts for Vertical Connectors Headers .029 [0.74] .050 [1.27] B Spaces at .050 [1.27] = C .162 [4.11] .010 [0.25] 4 Plc. C L of Pattern Detail A .182 [4.62] .091 [2.31] .047 [1.19] 2 Plc. .061 [1.54] Detail A D Receptacles .029 [0.74] .050 [1.27] .110 [2.79] Recommended PC Board Layouts B Spaces at .050 [1.27] = C C L of Pattern .130 [3.30] .065 [1.65] Detail A .060 [1.52] D No. of Pos.
PAGE 23
Ribbon Cable Interconnect Solutions Board-to-Board Right-Angle Headers Product Facts ■ Surface-mount R R AMPMODU 50/50 Grid Right-Angle Headers will accommodate a variety of high density packaging applications; right-angle board-to-board applications when mated with vertical receptacles (page 20) and right-angle cable-to-board applications when mated with cable connectors (page 26). The small .050 x .050 [1.27 x 1.27] centerline contact spacing allows efficient use of the PC board area.
PAGE 24
Ribbon Cable Interconnect Solutions Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline Non-Latching Header A .050 [1.27] Typ. .050 [1.27] .213 [5.41] Latching Header .352 [8.94] .050 [1.27] .430 [10.92] .029 [0.74] Typ Material and Finish .065 [1.65] Typ. Right-Angle Headers, Double Row, Latching and Non-Latching Housing — Liquid crystal polymer, black, 94V-0 rated Contacts — Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.
PAGE 25
Ribbon Cable Interconnect Solutions Cable-to-Board Connectors Product Facts ■ Double-row R R These double-row cable connectors, with a .050 x .050 [1.27 x 1.27] centerline contact spacing, provide cable-to-board connection capabilities for the AMPMODU 50/50 Grid Connector System. Cable connectors without a latch will mate with the vertical headers (page 21), while cable connectors with or without a latch can be used to mate with the right-angle headers (page 24).
PAGE 26
Ribbon Cable Interconnect Solutions Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27] Centerline A Material and Finish Housing — Thermoplastic, black, 94V-0 rated Latch — Stainless steel Contacts — Phosphor bronze; duplex plated .000030 [0.00076] minimum gold in mating area, .000150 [0.00381] minimum tin on solder tail, with entire contact underplated .000050 [0.00127] minimum nickel .280 [7.11] .627 [15.94] .690 [17.
PAGE 27
Ribbon Cable Interconnect Solutions Terminating Covers for Cable Connectors Material Glass-filled thermoplastic, black, 94V-0 rated A .191 [4.85] Related Product Data Connectors used with Covers — page 26 Termination Tooling — page 28 Technical Documents — page 29 .277 [7.04] Product Specification 108-1443 Application Specification 408-9817, 408-9909 Packaging — Plastic bag Cable Conncetor Terminating Cover, Double Row No. of Dimension Terminator Cover Pos. A Part Numbers 10 .565 [14.
PAGE 28
Ribbon Cable Interconnect Solutions Application Tooling for Cable Connectors The Manual Miniature Application Frame Assembly 91295-1, equipped with a Cover Closing Kit 543518-1, is used for the IDC termination of ribbon cable to the cable connectors shown on page 26. Prior to termination, the covers must be partially assembled onto a connector housing, the cable inserted between the covers and contacts and the covers preclosed by hand, clamping the cable in place.
PAGE 29
Ribbon Cable Interconnect Solutions Performance Specifications Board-to-Board Connectors, Vertical and Right-Angle Mating Force — 6.4 oz (1.78 N] max. per contact Unmating Force — 1.0 oz [0.28 N] min. per contact Durability — Tested to 200 cycles min. Current Rating — (30°C T rise): .5 ampere per contact Operating Temperature Range — -65°C to +105°C Termination Resistance — 16 milliohms max. (initial) Insulation Resistance — 5000 megohms min.
PAGE 30
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Micro-MaTch Miniature Connector System Features/ Benefits ■ Available in 2 to 20 positions ■ Applicable Wire: 20~28 AWG ■ Wire connectors supplied on-tape and suitable for mass termination of 28 AWG [0.08 mm2 to 0.09 mm2] ribbon cable ■ Tin plated contact design ■ Guaranteed minimum contact force of 2.
PAGE 31
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Overview Technical Data Technical Data 1.27 mm (staggered) 4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positions Phosphor bronze Tin over Nickel Thermoplastic polyester, red, glass-filled For surface mount versions polyamide 4.6 Flammability rating: per UL 94 V-0 UL-recognized: File E28476 Vol. 23 Section 4 Contact Resistance: 10 MΩ max. Insulation Resistance: 1.000 MΩ min. Nominal Voltage: 230 V Current Rating: 1.5 A max.
PAGE 32
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Applications (3 Dimensions) Micro-MaTch Miniature Connector System Applications (3 Dimensions) Male Connectors Female Connectors Male-on-Wire Part Number 215083 Male-on-Board Part Number 215464 COSI Part Number 338095 Part Number 338096 Part Number 338097 1 2 3 4 5/6 7 8 9 10 Paddle Board Part Number 215570 Female Top Entry Part Number 215079 Female Side Entry Part Number 215460 SMD Top Entry Part Number 188275 I
PAGE 33
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Applications (2 Dimensions) Male Connectors Male-on-Board Part Number 215464 Male-on-Wire Part Number 215083 Female Connectors 2 3 A C A A B B B Female Top Entry Part Number 215079 C C C 6 4 A 7 5 A C B C B G E D Female Side Entry Part Number 215460 E A B AB C F C Paddle Board Part Number 215570 Micro-MaTch Miniature Connector System Applications (2 Dimensions) 1 COSI Part Number 338095 Part Number
PAGE 34
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector, Top Entry 1.5 [.059] 5.1 Max. [.200] Micro-MaTch Miniature Connector System — Female-on-Board Connector, Top Entry This connector version incorporates the patented Micro-MaTch contact spring system and is designed to be soldered onto PC Boards with a nominal thickness of 1.6 mm.
PAGE 35
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector, Side Entry B Max. 3.1 [0.12] 5.8 [0.23] This connector version is identical to the top entry version with two exceptions: The solder legs are parallel to the mating face of the connector instead of perpendicular. ■ It's housing is polarized, so that polarization is accomplished directly between the two mating connectors.
PAGE 36
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector Surface Mount Device (SMD) Tape for Vacuum P&P Micro-MaTch Miniature Connector System — Female-on-Board Connector Surface Mount Device (SMD) 1.90 [.075] 1.27 [.050] This SMD connector version is designed for standard reflow and infrared solder processes (“FULL SMD”).
PAGE 37
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector PageHead_12_HelvCdBd (Continued) System — Male-on-Board Connector A 5.00 [.197] A This male connector version is designed to be soldered onto PC Boards with a nominal thickness of 1.6 mm. A 2.54 [.100] The solder legs are indented for firm retention of the connector in the PC Board. B 1.27 [.050] 6.75 [.
PAGE 38
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Male-on-Wire Connector A A For the wire connection, a well-known type blade with a single slot is used. The insides of the slots are tin plated for stable and reliable connections. A Max. B Max. 5.10 Max. [.201] Micro-MaTch Miniature Connector System — Male-on-Wire Connector 6.
PAGE 39
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Paddle Board Connector A 5.00 [.197] A Direct soldering of a ribbon cable onto a PC Board is a very difficult job with the smaller sizes of ribbon cable. If such a permanent cable connection is required, the application can be facilitated by using this connector type. A 2.54 [.100] B 1.27 [.050] 6.75 [.
PAGE 40
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Crimp On Snap In (COSI) Connector C 2.54 [.100] 1.27 [.050] 2.65 [.104] Basic Part Number 338095 and Contacts Part Numbers 338096 and 338097 B Max. 5.10 Max. [.201] This crimp version for discrete Wire-to-Board applications is fully compatible with all female connectors of the Micro-MaTch family.
PAGE 41
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Specials SMC Connector Part Number 100411 This connector type enables a solderless application to the printed circuit board. Contact is made on the surface of the PCB, enabling the use of paperphenol and epoxy boards with both drilled and punched holes. This connector is suitable for both Wire-to-Board as Board-to-Board connections.
PAGE 42
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Application Tooling Micro-MaTch Miniature Connector System Application Tooling Pistol Handgrip Tooling. This is a handtool for terminating Micro-MaTch Male-on-Wire and Paddle Board connectors. Meant for small quantities or repair services. Pistol handgrip and adapter must be ordered separately. Standard Pistol Handgrip Part Number 734155-1. This basic tool can be used for Micro-MaTch and other applications.
PAGE 43
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Application Tooling (Continued) Semiautomatic Tooling Part Number 677410-1. This tool can be used for Micro-MaTch lead end and for daisy chain assembly applications. Semiautomatic Tooling Part Number 677412-5 for Micro-MaTch only and Part Number 1-677412-0 for both Micro-MaTch and other ribbon cables. This machine can be used for lead end assemblies.
PAGE 44
Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Lead Assembly It is possible to deliver custom made Micro-MaTch lead assemblies, both cable end assemblies and daisychain assemblies, in all positions between 4 and 20 in all required cable lengths. All leads are 100% electrically tested on shortcut and connection before shipment. A flexible 7 stranded cable is used for easy assembly. Special cable on request. For order information contact TE.
PAGE 45
Ribbon Cable Interconnect Solutions PageHead_12_HelvCdBd Universal I/O Pin Connectors (Continued) without Mounting Ears Material and Finish Housing and Cover — Flame retardant UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, .000100 [0.00254] min. tin on termination end, .000030 [0.00762] min. gold on mating end, both over .000050 [0.00127] min.
PAGE 46
Ribbon Cable Interconnect Solutions Universal I/O Pin Connectors with Slotted Mounting Ears Material and Finish Housing and Cover — Flame retardant UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, .000100 [0.00254] min. tin on termination end, .000030 [0.00762] min. gold on mating end, both over .000050 [0.00127] min.
PAGE 47
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions EUROLATCH Receptacles, 64-Position (Three-Row Housings, Two Rows Loaded) Housing Assembly with Cover (Preassembled) 78.74 [3.100] 3.48 [.137] Row A 10.49 8.46 [.413] [.333] 8.46 [.333] Row B 84.89 [3.342] Row C 89.92 [3.54] 94.74 [3.730] Housing Assembly Cover Material and Finish Housing and Cover — UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, duplex plated 0.00076 [.
PAGE 48
Ribbon Cable Interconnect Solutions Novo Connectors .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Product Facts ■ .100 x .100 [2.54 x 2.54] mating grid for .050 [1.
PAGE 49
Ribbon Cable Interconnect Solutions Novo Receptacles, Military Polarized* .100 x .100 [2.54 x 2.54] Centers .460 [11.68] C .100 [2.54] .135 [3.43] .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Housing Assembly with Cover (Preassembled) and Strain Relief (Optional) .240 [6.10] .100 [2.54] • .329 [8.36] Contacts mate with .025 [0.64] sq. or round pins with .245 [6.22] max. and .175 [4.45] min. lengths. .093 [2.
PAGE 50
Ribbon Cable Interconnect Solutions Novo Receptacles, Center and Military Polarized* .100 x .100 [2.54 x 2.54] Centers .140 [3.56] .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Housing Assembly with Cover (Preassembled) and Strain Relief (Optional) C .460 [11.68] .100 [2.54] .135 [3.43] .240 [6.10] D .130 [3.30] Polarization Bar D • .100 [2.54] Housing Assembly Position No. 1 Index Slot .329 [8.36] Contacts mate with .025 [0.64] sq. or round pins with .245 [6.22] max. and .
PAGE 51
Ribbon Cable Interconnect Solutions Novo Receptacles, Dual Polarized, .100 x .100 [2.54 x 2.54] Centers .140 [3.56] C .460 [11.68] .100 [2.54] .135 [3.43] .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Housing Assembly with Recessed Cover (Preassembled) and Strain Relief (Optional) .240 [6.10] .100 [2.54] .140 [3.56] .190 [4.83] Housing Assembly Material and Finish Cover Position No.
PAGE 52
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series Technical Data .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series Color — 622 Series, Blue; 636 Series, Black Contact Material — 622 Series, Beryllium copper; 636 Series, Phosphor bronze Contact Plating — 622 Series, .000030 [0.00076] min. gold on mating end, .000100-.
PAGE 53
Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series (Continued) 622 Series Part Numbers A Dimensions B C TE Connectivity 6 10 12 14 16 20 24 26 30 34 40 50 64 .477 12.12 .677 17.20 .777 19.74 .877 22.28 .977 24.82 1.177 29.90 1.377 34.98 1.477 37.52 1.677 42.60 1.877 47.68 2.177 55.30 2.677 68.00 3.377 85.78 .200 5.08 .400 10.16 .500 12.70 .600 15.24 .700 17.78 .900 22.86 1.100 27.94 1.200 30.48 1.400 35.56 1.600 40.64 1.900 48.26 2.
PAGE 54
METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series Technical Data .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series Color — Blue Contact Material — Beryllium copper Contact Plating — .000030 [0.00076] min. gold on mating end, .000100.000200 [0.00254-0.00508] tin on termination end, both over .000050 [0.00127] nickel underplate.
PAGE 55
Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series (Continued) 609 Series, Military Polarized Part Numbers No.of Pos. 10 16 20 26 40 50 .476 12.09 .676 17.17 .976 24.79 1.176 29.87 1.476 37.49 2.176 55.27 2.676 67.97 Dimensions B C .200 5.08 .400 10.16 .700 17.78 .900 22.86 1.200 30.48 1.900 48.26 2.400 60.96 .392 9.96 .592 15.04 .892 22.66 1.092 27.74 1.392 35.36 2.092 53.14 2.592 65.
PAGE 56
Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series Technical Data .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate.
PAGE 57
Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series 7.57 (.298) Technical Data .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate.
PAGE 58
Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers Housing Assembly with Cover (Preassembled) B C .050 [1.27] .278 [7.06] .100 [2.54] A .050 [1.27] A .050 [1.27] Material and Finish .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers Housing and Cover — Black thermoplastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000005 [0.000127] min. gold in termination area, .000100 [0.00254] min. tin on solder tails, both over .
PAGE 59
Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .300 [2.54 x 7.62] Centers Housing Assembly with Cover (Preassembled) Material and Finish .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .300 [2.54 x 7.62] Centers Housing and Cover — Black thermoplastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000050 [0.00127] nickel underplate on entire contact, .000005 [0.000127] min. gold on termination (IDC) end. See table for leg finish.
PAGE 60
Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .600 [2.54 x 15.24] Centers Housing Assembly with Cover (Preassembled) Material and Finish .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .600 [2.54 x 15.24] Centers Housing and Cover — Black thermoplastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000050 [0.00127] nickel underplate on entire contact, .000005 [0.000127] min. gold on termination (IDC) end. See table for leg finish.
PAGE 61
Ribbon Cable Interconnect Solutions 4-Row PCB Solder Transition Connectors Technical Data Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate. Contact Design — Dual slot, barrel shaped (“tulip”) IDC with solder tail Housing Material — Glass-filled thermoplastic, UL 94V-0 rated Cable — 28-30 AWG solid or stranded, PVC insulated ribbon cable .050 [1.
PAGE 62
Ribbon Cable Interconnect Solutions 1-Row Horizontal Receptacles A B 1.25 Pitch [.049] 1.35 [.053] 1.40 [.055] 2.80 3.00 [.110] [.118] Optional Mounting Boss 3.40 [.134] 4.20 [.165] Material and Finish Housing — Black PPS, UL 94V-0 rated Contacts — Phosphor bronze, post tin plated over nickel underplate 0.70 Min. [.028] 3.40 [.134] .050 [1.27] Centerline Ribbon Cable Connectors 1-Row Horizontal Receptacles 0.05 [.002] 0.50 [.020] C 0.80 [.031] 1.30 [.051] 0.70 Min. [.028] Ø 0.80 [.031] 1.
PAGE 63
Ribbon Cable Interconnect Solutions Accessories (Continued) Flexible Pull Tabs Approximate Installed Height of Part Number 120623-1 Above Connector Material and Finish Dimensions C H .680 1.806 17.27 45.87 1.749 .880 44.42 22.35 1.721 .980 43.71 24.89 1.180 1.664 29.97 42.27 1.380 1.607 35.05 40.82 1.578 1.480 40.08 37.59 1.680 1.521 42.67 38.63 1.880 1.464 47.75 37.19 1.436 1.980 36.47 50.29 1.379 2.180 35.03 55.37 2.380 1.322 60.45 33.58 2.680 1.236 68.07 31.39 3.180 1.094 80.77 27.79 3.380 1.037 85.
PAGE 64
Ribbon Cable Interconnect Solutions Accessories (Continued) Keying Plugs Material and Finish Thermoplastic, see table for color Keying Plug Plug (Installed in Contact) Typical Application Key Plug 111620-1 Accessories There are ten key plugs on a comb .500 [12.70] .245 [6.22] .029 [0.58] .185 [4.70] Polarizing Key 1-1437023-2 Receptacle Connector Series 2 mm Rcpt.
PAGE 65
Ribbon Cable Interconnect Solutions Accessories (Continued) Keying Plugs (Continued) Material and Finish Thermoplastic, see table for color Receptacle Connector Series Part Number 499712-1 Catalog Pages Novo Connectors 48-51 Ultra ATA Bus Connectors 13-15 Keying Plug Part Number 499712-1 104072-1 499712-1 104072-1 Style Single Comb Single Comb Color Black Black Order by TE Part Number only. Key Plug (Plugs into Contact) Alternate Configuration Keying Plug Part No.
PAGE 66
Ribbon Cable Interconnect Solutions Accessories (Continued) Pull Loops, Permanent (for Receptacles and Pin Connectors) Material and Finish Natural color PVC, 94-VTM-1 rating (thin material) Related Product Data Use with: Female Socket Connectors — pages 52-55 Ultra ATA Bus Connectors — pages 13-15 2 mm Receptacle Connectors — pages 16 and 17 Novo Connectors — pages 48-51 Accessories Note: This pull loop is installed manually between the cover and strain relief, and cannot be used without strain relief.
PAGE 67
Ribbon Cable Interconnect Solutions Accessories (Continued) Strain Relief for Universal I/O Pin Connectors Without Mounting Ears Glass-filled polyester, black No. of Pos. 10 A .330 [8.38] Typ. Material and Finish .313±.004 [7.95±0.10] Typ. C 14 .098±.002 [2.49±0.05] 2 Plc. 16 20 Related Product Data B Universal I/O Pin Connectors — page 45 24 26 30 34 40 44 50 60 64 A .520 13.21 .720 18.29 .820 20.83 1.020 25.91 1.220 30.99 1.320 33.53 1.520 38.61 1.720 43.69 2.020 51.31 2.220 56.39 2.520 64.
PAGE 68
Ribbon Cable Interconnect Solutions Accessories (Continued) Strain Relief for Novo and Ultra ATA Bus Connectors A No. of Pos. 10 Material and Finish 14 Glass-filled polyester, black .240 [6.10] B Related Product Data Novo Connectors — pages 48-51 Ultra ATA Bus Connectors — pages 13-15 .186 [4.72] .106 [2.69] Ref. 16 20 24 .581 [14.76] Ref. 26 30 34 40 44 50 60 64 Dimensions A B .534 .690 13.56 17.53 .890 .734 22.61 18.64 .990 .834 25.15 21.18 1.034 1.190 26.26 30.23 1.390 1.234 31.34 35.31 1.
PAGE 69
Ribbon Cable Interconnect Solutions Accessories (Continued) Strain Relief for 622 and 636 Series Female Socket Connectors A Material and Finish Glass-filled PBT, see table for color .236 [6.00] Related Product Data Female Socket Connectors — pages 52 and 53 .555 [14.10] Part Number No. of Pos. Dimension C Color 6 .477 12.12 10 .677 17.20 14 .877 22.28 16 .977 24.82 20 1.177 29.90 24 1.377 34.98 26 1.477 37.52 30 1.677 42.60 34 1.877 47.68 40 2.177 55.30 50 2.677 68.
PAGE 70
Ribbon Cable Interconnect Solutions Ribbon Cable Assembly Machines (R-CAM) Application Tooling Product Facts ■ Terminates 28 AWG [0.08 mm2] .050 [1.27] centerline and 30 AWG [0.05 mm2] .025 [0.64] centerline cable to a variety of connectors ■ Automatic in-process electrical testing — tests all circuits for opens, shorts and high-voltage breakdown (up to 1,000 volts for receptacles, 800 volts for card edge connectors and 300 volts for .025 [0.
PAGE 71
Ribbon Cable Interconnect Solutions Comparison of R-CAM 2A, R-CAM 3A and R-CAM 4 Machine Model R-CAM 2A R-CAM 3A R-CAM 4 Part Number* 760700-❑ 761900-❑ 318800-❑ Cable Size Cable Assembly Configurations (Refer to page 73) 28 AWG [0.08 mm2], .050 [1.27] centerline 28 AWG [0.08 mm2], .050 [1.27] centerline 28 AWG [0.08 mm2], .050 [1.27] centerline and 30 AWG [0.05 mm2], .025 [0.
PAGE 72
Ribbon Cable Interconnect Solutions Typical Production Rates (Assemblies/Hour) Machine Model Connectors Per Assembly 4 [100] Length 24 [160] 8 [205] 1 665 620 — 570 500 405 2 R-CAM 2A 475 460 375 3 4 — 420 360 R-CAM 3A 2 1 075 950 780 — 275 265 4 — 205 200 5 R-CAM 4 6 — 170 165 10 — — — Note: Actual production rates may vary depending on the cable assembly configuration.
PAGE 73
Ribbon Cable Interconnect Solutions Cable Assembly Configurations R-CAM 2A 2.70 to 8 [70 to 205] end-to-end 2.70 to 48 [70 to 1 220] end-to-end 0 to 8 [0 to 205] 1.50 Min. [35 Min.] center-to-center R-CAM 3A 1.74 to 105 [45 to 2 665] end-to-end 0 to 24 [0 to 610] Application Tooling 0 to 24 [0 to 610] 1.74 to 105 [45 to 2 665] end-to-end 1.74 to 105 [45 to 2 665] end-to-end R-CAM 4 1.60 to 100 [40 to 2 540] center-to-end 1.60 to 100 [40 to 2 540] center-to-center 0 to 24 [0 to 610] 1.60 Min.
PAGE 74
Ribbon Cable Interconnect Solutions Application Tooling Manual Arbor Frame Assembly, Part No. 91085-2 Hand Tool Kit—Part No. 768340-1 Terminating kit for .050 [1.27] centerline ribbon cable with 28 or 26 AWG [0.08 or 0.15 mm ] stranded or solid, or 30 AWG [0.05 mm ] solid conductors.
PAGE 75
Ribbon Cable Interconnect Solutions Low Profile Headers Product Facts ■ Available in selected positions 10 thru 60 ■ Flame retardant, thermoplastic housings, 94V-0 rated ■ Vertical and right-angle versions available in double row configurations ■ Available in .025 [0.
PAGE 76
Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines +.000 Low Profile Headers Vertical PCB Mount .025 [0.64] Square Post (Mating End) A -.010 [+0.00 -0.25] .045 [1.14] B Pin 1 .130 [3.30] .165 [4.19] .015 .010 0.38 0.25 [ ] .360 [9.14] .025 ± .001 [0.64 ± 0.03] Typ.
PAGE 77
Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Low Profile Headers Right-Angle PCB Mount .025 [0.64] Square Post (Mating End) Position No.1 Indicator • .388 [9.86] .165 [4.19] .025 ± .001 [0.64 ± 0.03] Typ. Material and Finish +.000 Housing — Glass-filled nylon, UL 94V-0 rated, black Posts — Brass, plated as follows: Plating A — Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min.
PAGE 78
Ribbon Cable Interconnect Solutions Low Profile Headers Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for PCB Retention Vertical PCB Mount .025 [0.64] Square Post (Mating End) with Board Retention Feature +.005 -.010 A +0.13 [-0.25] .045 [1.14] B Pin 1 .130 [3.30] .025 .020 0.64 0.51 .165 [4.19] [ ] .360 [9.
PAGE 79
Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for PCB Retention (Continued) Low Profile Headers Position No.1 Indicator Right-Angle PCB Mount .025 [0.64] Square Post (Mating End) with Board Retention Feature • .388 [9.86] .165 [4.19] .025±.001 [0.64±0.03] Typ. +.005 -.010 A +0.13 Pin 1 [-0.25] .045 2 Plcs. [1.14] .130 Typ. [3.30] .100 [2.
PAGE 80
Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches, Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines IDC Low Profile Headers Vertical PCB Mount .025 [0.64] Square Post (Mating End) B Pin 2 .362 [9.19] .254 ± .006 [6.45 ± 0.15] .100 [2.
PAGE 81
Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches, Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) B Pin 2 .362 [9.19] .254 ± .006 [6.45 ± 0.15] .100 [2.54] Pin 1 Latching Height .575 Long [14.61] .427 Short [10.85] .025 ± .001 [0.64 ± 0.
PAGE 82
Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines .013 [0.33] IDC Low Profile Headers Vertical PCB Mount .025 [0.64] Square Post (Mating End) B Pin 2 .010 .252 +– .004 .005 .350 +– .010 + 0.25 + 0.13 [6.40 – 0.10 ] [8.89 – 0.25 ] .100 [2.54] Pin 1 A Material and Finish Housing and Eject Latches — PBT, UL 94V-0 rated, blue Posts — Phosphor bronze, plated as follows: Plating — Duplex plated, .000030 [0.
PAGE 83
Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) IDC Low Profile Headers Right-Angle PCB Mount .025 [0.64] Square Post (Mating End) B .013 [0.33] Pin 2 .010 .252 +– .004 0.25 [6.40 +– 0.10 ] .005 .350 +– .010 + 0.13 [8.89 – 0.25 ] .100 [2.54] Pin 1 A .025 ± .001 [0.63 ± 0.
PAGE 84
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount .025 [0.64] Sq. Posts (Mating End) .100 [2.54] Pin 2 .150 [3.81] .165 [4.19] .253 [6.43] .190 [4.83] .100 [2.54] .336 .315 [8.53] [8.00] .150 [3.81] A .050 [1.27] .107 [2.72] .025 [0.64] B Pin Header with Latches Ø .025 [0.64] .240 [6.10] Pin 1 .289 [7.34] C .110 or [2.79] .155 [3.94] Solder Tail Position No.1 Indicator .
PAGE 85
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Vertical PCB Mount .025 [0.64] Sq. Posts (Mating End) (Continued) Soldertail Length No. of Positions 10 14 16 20 24 26 .110 2.79 30 34 40 50 60 64 10 14 16 24 26 .155 3.
PAGE 86
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Mounting Information 4-24 self-tapping screws and 2-56 bolts and nuts are available for mounting straight-thru pin headers of pc boards. Typical applications and part nos. for ordering this hardware are presented below. E .106 [2.88] Dia. (For Nut & Bolt hardware) F .100 [2.54] .100 [2.54] .116 [2.95] Dia. (For Self-Tapping Screw hardware) .
PAGE 87
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount .025 [0.64] Sq. Posts (Mating End) .100 [2.54] .150 [3.81] .253 [6.43] .165 [4.19] .190 [4.83] Pin 2 .336 .315 [8.53] [8.00] .050 .150 [3.81] [1.27] A B C Pin 1 .240 [6.10] .030 [0.76] Pin Header without Latches .025 [0.
PAGE 88
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Tail Length .174 [4.42] .610 [15.49] Pin Header (without Latches) 1658694-6 1658694-7 1658694-8 1658694-1 1658694-9 1658694-2 1-1658694-0 1-1658694-1 1658694-3 1658694-4 1658694-5 1658695-2 1658695-3 1658695-4 1658695-5 1658695-6 1658695-1 1658695-7 1658695-8 1658695-9 Contact Finish (Plating Code) No.
PAGE 89
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Right-Angle PCB Mount .025 [0.64] Sq. Posts (Mating End) .100 [2.54] Pin 2 .150 [3.81] .253 [6.43] .165 [4.19] .190 [4.83] .336 .315 [8.53] [8.00] .050 [1.27] .150 [3.81] A B C Pin 1 .025 [0.64] Pos. No. 1 Indicator .096 [2.44] Pin Header with Latches .549 [13.94] .108 [2.74] .195 [4.95] D .025 [0.64] Dia. .100 [2.
PAGE 90
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Right-Angle PCB Mount .025 [0.64] Sq. Posts (Mating End) (Continued) Soldertail Length No. of Positions 10 14 16 20 24 26 .110 2.79 30 34 40 50 60 64 10 14 16 20 24 Military, Center and Dual Polarized, Right-Angle Universal Ejection Style Pin Headers 26 .155 3.
PAGE 91
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Mounting Information No mounting hardware is supplied by TE. E .106 Dia. [2.69] F .100 [2.54] .100 [2.54] .029 [0.74] .230 [5.84] .035 Dia. Typ. [0.89] Position No.1 Recommended Mounting Hole Pattern For Right-Angle PCB Mount Headers PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts, .125 [3.18] for .155 [3.94] long posts.
PAGE 92
Ribbon Cable Interconnect Solutions Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount .025 [0.64] Sq. Posts (without latches) Pin 2 .100 [2.54] Dia. 2 Holes E .100 [2.54] .150 [3.81] .050 [1.27] C Pin 1 Position No.1 Indicator Pinless Header Material and Finish • Housing — Black PBT or nylon, UL 94V-0 rated .549 [13.
PAGE 93
Ribbon Cable Interconnect Solutions Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Installation of Press-Fit Pinless Headers Insertion Instructions: 1. Place pinless header over preinstalled posts so that post tips start into header cavities. 2. With bottom of pc board supported, place steel block over header. Steel block must be wider and longer than header so that it covers all four sides of the header.
PAGE 94
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with PCT Housing, .100 x .100 [2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) .100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End) Universal Ejection Style Pin Headers with PCT Housing C .195 [4.95] .200 [5.08] .549 [13.94] .110 [2.79] • .025 [0.64] Vertical PCB Mount .040 [1.02] Position No.1 Indicator A B Pin 1 D .250 [6.35] .289 [7.34] .150 [3.81] .050 [1.27] .100 [2.54] .100 [2.54] .150 [3.
PAGE 95
Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with PCT Housing, .100 x .100 [2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) (Continued) B 10 1.260 32.00 1.460 37.08 1.560 39.62 1.760 44.70 1.960 49.78 2.060 52.32 2.260 57.40 2.460 62.48 2.760 70.10 3.260 82.80 3.760 95.50 3.960 100.58 1.100 27.94 1.300 33.02 1.400 35.56 1.600 40.64 1.800 40.64 1.900 48.26 2.100 53.34 2.300 58.42 2.600 66.04 3.100 78.74 3.600 91.44 3.800 96.52 .860 21.84 1.060 26.92 1.160 29.
PAGE 96
Ribbon Cable Interconnect Solutions Latches for Ejection Style Universal Pin Headers and Pinless Headers Latches for Ejection Style Pin Headers and Pinless Headers Latches for use with Novo Receptacles and Female Socket Connectors, 609, 622 & 636 Series Latch/Pin Header Applications 1.092 1.075 [27.72] [27.31] Material Red PCT, UL 94V-0 Rated .265 [6.73] .576 [14.
PAGE 97
Ribbon Cable Interconnect Solutions Cable Solutions .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation Product Specifications Voltage Rating — 300 Volts UL Recognized — AWM Style 2651 CSA — Available on request B A Cable Solutions .050 Typ. [1.27] C Edge Mark Dimensions A B 24 AWG 7/32 Tinned Copper 2 .100 [2.54] .200 [5.08] 5 .400 [10.16] .500 [12.70] 10 .900 [22.86] 1.000 [25.40] 15 1.400 [35.56] 1.500 [38.10] 20 1.900 [48.26] 2.000 [50.80] 25 2.400 [60.96] 2.500 [63.50] 28 2.700 [68.58] 2.
PAGE 98
Ribbon Cable Interconnect Solutions Cable Solutions (Continued) .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation Product Specifications Cable Solutions Voltage Rating — 300 Volts UL Recognized — AWM Style 2651 CSA — Available on request B A .078 Typ. [1.98] C Edge Mark No. of Conductors A 22 AWG 7/30 Tinned Copper 2 .156 [3.96] 5 .624 [15.85] 10 1.404 [35.66] 15 2.184 [55.47] 20 2.964 [75.29] 24 3.588 [91.14] 18 AWG 7/26 Tinned Copper 2 .156 [3.96] 5 .624 [15.85] 10 1.404 [35.66] 15 2.
PAGE 99
Ribbon Cable Interconnect Solutions Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No.
PAGE 100
TE Connectivity Catalog 82012 Revised 4-12 © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82012 LUG PDF 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. Ribbon Cable Interconnect Solutions te.