Datasheet
86
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Military, Center and Dual Polarized, Vertical Mount
Universal Ejection Style Pin Headers
Universal Ejection Style Pin Headers, Military, Center and
Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines
(Continued)
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts
are available for mounting
straight-thru pin headers
of pc boards. Typical appli-
c
ations and part nos. for
ordering this hardware are
presented below.
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
R
ecommended Mounting Hole Pattern
For Vertical PCB Mount Headers
PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts,
.
125 [3.18] for .155 [3.94] long posts.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
.
106
[2.88]
Dia.
.035
[0.89]
Dia.
.
100
[2.54]
.
350
[8.89]
.100
[2.54]
.060
[
1.52]
E
F
4-24
S
elf-Tapping
Screw
(2 Req‘d.)
(
For Nut & Bolt
hardware)
.116
[
2.95]
D
ia.
(
For Self-Tapping
Screw hardware)
Position No. 1
2-56
B
olt & Nut
(2 Each Req‘d.)
Latch
(See Note
a
t left.)
.256
[6.50]