Information

89
Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
FASTON Terminals (Insulated and Uninsulated)
Ultra-Fast Fully Insulated FASTON Receptacles and Tabs
Ultra-Fast Fully Insulated FASTON Receptacles and Tabs
Product Facts
■ One-piece Fully Insulated
Premier Line FASTON
Receptacle crimp helps
prevent shock and short
hazards
■ Designed for correct lead-in
of tab
■ Designed for full mating
with a variety of tab styles
including those with
shoulders
■ Funnel wire entry
■ Wire Stop
■ Visual inspection of crimp
and wire brush
■ Assemblies are color-coded
by wire size
■ Assemblies contain wire
size and tab size
designation
■ Mating tab thickness
marked on terminal and
visible through housing
(.110, .187 and .205 Series)
■ Application tooling
available to meet
production requirements
■ Tin plated copper alloy
terminals
■ UL rated at + 105°C
■ Terminates 26-10 AWG
solid, fused and stranded
wire (Flags terminate
stranded wire only)
Performance Capabilities
■ Meets UL-310 specification
for quick connect terminals;
UL listed under
File No. E-66717
■ Meets CSA C22.2, No. 153
specification for quick
connect terminals;
CSA Certified under
File No. LR 7189
■ 600-volt application
capability (1,000 volts for
signs and fixtures)
The Ultra-Fast Fully Insulated
FASTON Receptacle and
Tab offers the advantage of
a completely protected
terminal and a wire crimp
with comparable
electromechanical
performance to open barrel
“F” crimp FASTON Terminals.
The “User-Friendly” design
combines easy mating with
rounded corners. The .187
and .250 series receptacles
incorporate a two-stage roll
configuration and a canti-
lever mounted dimple which
provides easy insertion and
multiple independent points
of contact for reduced tab
interface resistance.
Ultra-Fast Fully Insulated
FASTON Receptacles,
Flag Receptacles and Tabs
preclude the need for costly
electrical safety interlocks or
special protective shields to
help prevent shock hazards.
In addition, electrical short
circuits from exposed leads
are eliminated, even in
equipment requiring close
contact spacing.
The Ultra-Fast FASTON
Receptacle, Flag Receptacle
and Tab are preinsulated
assemblies featuring a
housing molded from
type 6/6 nylon material
with a +130°C UL
temperature rating.
The Ultra-Fast FASTON
Receptacle housing
completely encloses a tin
plated copper alloy Premier
FASTON receptacle which
has been stress-relieved for
increased durability and
resistance to abuse. The
FASTON receptacle is
recessed sufficiently within
the housing to allow its use
in 600-volt applications. The
receptacle portion of the
terminal is designed for
positive mating with a variety
of tabs, including those with
shoulders. The housing has
a slotted membrane which
is displaced by two tab
shoulders allowing proper
engagement of tab and
receptacle while maintaining
the fully insulated
characteristic.
Positive entry and lead-in of
the tab is provided by the
inner housing wall and the
lead-in on the terminal rolls.
This permits positive
engagement, even in blind
mating locations.
The Ultra-Fast FASTON
Tab housing completely
encloses a tin plated copper
alloy FASTON tab. The
FASTON tab is recessed
sufficiently within the
housing to allow its use in
600-volt applications. The
housing is designed to
completely encapsulate the
tab and receptacle when the
two are mated.
Quality control is easily
maintained. The nylon
housing is translucent,
allowing visual inspection of
the termination. In addition,
a crimp code on the platform
hand tool is indented into the
housing during the crimping
operation which identifies
that the proper crimp dies
were used.
Depending on production
requirements, TE provides
a complete selection of
terminating equipment from
hand tools to automatic
lead makers.
R
R