Datasheet
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50) 1583518-1 IS 408-8812 2700 lb Air Bench Machine 312522-1 CM 409-5843
Upper Tooling (MTA-50) 1583514-1 IS 408-8812 Terminator Assembly, "G" Term 354500-1 CM 409-5842
Manual Arbor Frame Assembly 58024-1 IS 408-6923 AMP-O-LECTRIC Bench Machine 1-471273-3 CM 409-5128
Ribbon Cable Applicator, .100 58039-1 IS 408-6685 Conversion Kit 690675-2 IS 408-8022
Ribbon Cable Applicator, .156 58040-1 IS 408-6701 Base Assembly 853542-1 IS 408-9636
Manual Hand Tool 58074-1 IS 408-6790 Base 854200-1 IS 408-9650
Air Bench Mount Tool 58338-1 IS 408-9393 Adapter (AMP-O-LECTRIC) 854468-1 IS 408-9687
Air Hand Tool (MTA-100) 58575-1 IS 408-4260 Adapter (2700 lb Machine) 854468-2 IS 408-9687
Air Harness Tool (MTA-156) 58576-1 IS 408-4260 Repair Kit 856600-1 IS 408-9745
T-Handle Maintenance Tool (MTA-100) 59803-1 IS 408-7907 Repair Kit 856600-2 IS 408-9745
T-Handle Maintenance Tool (MTA-156) 59804-1 IS 408-7907 Electric Bench Mount Tool 931800-1 CM 409-5746
Air Arbor Frame Assembly 91112-2 IS 408-7763
One-At-A-Time Termination Tooling
Interchangeable Heads Interchangeable Head & Loose Piece Feed Track
MTA-50 MTA-156 MTA-100 MTA-156
1583503-1 IS 408-8801 58247-1 IS 408-6930 933567-1 IS 408-9435 933568-1 IS 408-9466
MTA-100
58247-2 IS 408-9380
Interchangeable Heads & Tape Feed Track
58246-1 IS 408-6929
58247-3 IS 408-4146
MTA-100 MTA-156
58246-2 IS 408-9379
58443-1 IS 408-9607
853546-1 IS 408-9636 853547-1 IS 408-9637
58246-3 IS 408-4147
58061-1 IS 408-6794
Special Applicators
58442-1 IS 408-9603
58082-1 IS 408-6795
MTA-100 MTA-156
58638-1 IS 408-4358
58392-1 IS 408-9450
466728-1 AI 408-8054 466727-1 AI 408-8054
567020-1 AI 408-8069
Mass Termination Tooling
Die Set Assembly
MTA-50 MTA-100 MTA-156 MTA-100
1583515-1 IS 408-8812 58242-1 IS 408-7994 58009-1 IS 408-7995 854175-1 IS 408-9667
1583515-2 IS 408-8812 58242-3 IS 408-7994 58009-2 IS 408-7995
1583516-1 IS 408-8812 58243-1 IS 408-7994 58010-2 IS 408-7995 MTA-156
1583516-2 IS 408-8812 58635-1 IS 408-7994 58244-1 IS 408-7995 854176-1 IS 408-9650
1583517-1 IS 408-8812 58636-1 IS 408-7994 58244-3 IS 408-7995
58644-1 IS 408-4406 58245-1 IS 408-7995
58644-2 IS 408-4440 58245-3 IS 408-7995
59844-1 IS 408-7994 58646-1 IS 408-4405
59845-1 IS 408-7994 58646-2 IS 408-4439
59845-3 IS 408-7994 59848-1 IS 408-7995
59848-3 IS 408-7995
Technical Documents
Typical Application Rates
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in auto-
matic and semiautomatic machines.
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Method
Terminations
Per Hour
Manual Hand Tool 58074-1 with
Interchangeable Head 58246-1
—
Electric Bench Machine 931800-1 with
Interchangeable Head 58246-1
900
Electric Bench Machine 931800-1 with
Interchangeable Head and
Loose-Piece Feed Track 933567-1
1,100
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
1,250
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
Method
Terminations
Per Hour
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture
650
For further information about tooling call Technical Support.
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Method
Terminations
Per Hour
2700 lb Air Bench Machine 312522-1 with
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
7,500
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Cable Notching
Method
Cable Ends
Per Hour
2700 lb Air Bench Machine 312522-1 with
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
1,000
79
Application
Tooling
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341