Information
78
Application
Tooling
Applicator and Holding Fixture
■ Wires are laced into
plastic combs for mass
termination
■ Trims excess wire for
closed-end terminations
■ Holding fixture may be
mounted to a harness
board
Applicator and Tape Feed Track
■ Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
■ Connectors are fed using
a simple spring-loaded
pusher
■ Feed stop easily adjusted
for different connector
sizes
■ Notch cable with up to
28 conductors for .100
centerline, and 24
conductors for .156
centerline
■ Pressure plate holds
cable in position during
notching
■ Scrap conveniently
removed through a chute
with a blast of air from a
built-in air valve
Mass Termination Tooling
(Typical Tooling
Combinations)
Manual Bench Tool with
Applicator and Holding Fixture
Manual Bench Tool with Applicator and Tape Feed Track
Air Bench MachineAir Harness Tool with
Applicator
Ribbon Cable Notcher
Assembly
2700 lb Air Bench Machine with
Ribbon Cable Notcher Assembly
Power Units
Manual Bench Tool —
Arbor Frame Assembly
Part No. 58024-1
■ Applicator and holding
fixture can be oriented for
operator convenience for
closed-end or feed-thru
terminations
■ Ram height (insertion
depth) is easily adjusted
■ May be bench mounted
Air Harness Tools —
Hand-Held Power Unit
with Applicator
Part No. 58575-1 (MTA-100)
Part No. 58576-1 (MTA-156)
■ Applicator can be rotated
360° for orientation with
holding fixture
■ Insertion depth is easily
adjusted
■ Operates at air pressure
between 75 and 95 psi
[5.17 and 6.55 bar]
Air Bench Machine —
Pneumatic Unit
Part No. 91112-2
■ Operated by a foot
switch
■ Operates at air pressure
between 80 and 90 psi
[5.52 and 6.21 bar]
■ Not recommended for
notching cable with more
than 14 conductors
2700 lb Air Bench Machine —
Part No. 312522-1
■ Operated by a foot
switch
■ Capable of exerting
2,700 lb [12,000 N] of
force at minimum 80 psi
[5.52 bar] air pressure
■ May be bench mounted
Applicators and Notcher Assemblies
Ribbon Cable Notcher Assembly
Part Number
Wire Size
Centerline Used With
AWG
854449-2 26-28
.100 Manual Bench Tool
2.54 58024-1
854449-4 22-28
.100 Air Bench Machine
2.54 91112-2
2700 lb Bench Machine
.156
312522-1
854449-3 18-24
3.96
AMP-O-LECTRIC
Bench Machine 1-471273-3
(with Conversion Kit 690675-2)
Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC
Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb
Air Bench Machine.
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341