Information

Interchangeable Head
■ Terminates one
unstripped wire per cycle
■ Aligns and holds the
connector in place for
each termination
■ Automatically advances
the connector after each
termination
Interchangeable Head and
Loose-Piece Feed Track
■ No special setup required
■ Connectors are easily
loaded into feed track
■ Connectors are fed using
a simple spring-loaded
pusher
Interchangeable Head and
Tape Feed Track
■ No special setup required
■ Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
■ Connectors are fed using
a simple spring-loaded
pusher
Special Applicator
■ Connectors are easily
hand loaded into feed
track
■ Automatically advances
the connector after each
termination
■ Cannot be cycled until
the connector is properly
positioned
Manual Hand Tool with
Interchangeable Head
Air Bench Mount Tool with
Interchangeable Head and
Foot Switch
Air Hand Tool with
Interchangeable Head
Electric Bench Machine with
Interchangeable Head
One-At-A-Time Termination
Tooling (Typical Tooling
Combinations)
Air Bench Mount Tool with
Interchangeable Head and Loose-Piece Feed Track
Electric Bench Machine with
Interchangeable Head and
Tape Feed Track
AMP-O-LECTRIC Bench
Machine with Special Applicator
Power Units
Manual Hand Tool —
Pistol Grip Handle
Part No. 58074-1
■ Easy to use
■ Ratchet control will not
release the trigger until it
is fully bottomed
■ Head may be rotated for
user convenience
Air Hand Tool —
Pistol Grip Pneumatic Handle
Part No. 58075-1
■ Light weight
■ Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
■ Head may be rotated for
user convenience
Air Bench Mount Tool —
Bench Mount Power Assembly
Part No. 58338-1
■ May be mounted with
interchangeable head
pointed up or down
■ Operated by a foot
switch
■ Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
Electric Bench Machine —
IDC Power Unit
Part No. 931800-1
■ All electric: 120 VAC,
60 Hz, 2 A
■ Compact, portable and
quiet
■ Operated by a foot
switch
T-Handle Maintenance Tool
Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)
77
Application Tooling
MTA Application Tooling Options (Continued)
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341