Datasheet
4
MTA-50
.050 [1.27]
Product Facts
■ 2–28 contact positions
■ Connectors terminate 26,
28 and 30 AWG discrete wire
or .050 [1.27] centerline rib-
bon cable
■ Color-coded housings
■ Maximum cable insulation
diameter of .039 [0.99] with
PVC insulation only
■ IDC contacts pre-loaded in
receptacle housing
■ 30 V, 1 A contact rating
■ Contact design allows for
gold-to-gold or tin-to-tin
interface
■ Contacts are lubricated to
prevent fretting corrosion
■ Wire feed-thru capability for
daisy-chain wiring or closed
end for point-to-point wiring
■ Connectors are polarized for
proper mating
■ Manual and semiautomatic
application tooling
■ Mating heights shown below:
■ Component Recognized by
Underwriters Laboratories
Inc. to US and Canadian
Standards,
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
The MTA-50 IDC Connector
System is a wire-to-printed cir-
cuit board system with con-
tacts in a staggered, single
row on .050 [1.27] centerline.
The design features wire feed-
through capability for daisy-
chain applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be ter-
minated when the appropriate
receptacle assembly and
strain relief cover are used.
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
through-hole and surface
mount configurations.
Typical uses of the MTA-50
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
See the following pages for
related products:
■ Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
■ Application Tooling (p. 76)
■ Cable Assemblies (p. 74)
Performance Data
Voltage Rating — 30 VAC
Current Rating — 1 amp max.
Low-Level Resistance —
30 milliohms
Dielectric Withstanding Voltage —
500 VAC
Insulation Resistance —
1,000 megohms
Operating Temperature —
–55°C to +105°C for connector only;
cable rating may be lower
Technical Documents
Application Specification —
114-13072 MTA-50 Connectors
Product Specifications —
108-2113 MTA-50 Connectors
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
TPO insulation)
.503
[12.78]
or
.254
[6.45]
Max.
Vertical
Max.
Right-Angle
These matrixes have been
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combina-
tion. Where a “Y” is indicated
the combination is a valid
mating pair.
Note: Tyco Electronics does NOT rec-
ommend intermating connectors and
headers with different contact plat-
ings.
1445120
1445121
1445169
1445172
Connector Kits
1445343 YY YY
1445346 YY YY
1445349 YY YY
1445352 YY YY
1445355 YY YY
1445358 YY YY
1445361 YY YY
1445364 YY YY
1445367 YY YY
1445370 YY YY
1445373 YY YY
1445376 YY YY
1445125
1445126
1445171
1445174
Headers
Connector Kits
Matrix for .000030 [0.00076]
Gold Plated Part Numbers
1445342 YY YY
1445345 Y YYY
1445348 Y YYY
1445351 Y YYY
1445354 Y YYY
1445357 Y YYY
1445360 Y YYY
1445363 Y YYY
1445366 Y YYY
1445369 Y YYY
1445372 Y YYY
1445375 Y YYY
1445123
1445124
1445170
1445173
Connector Kits
Matrix for .000015 [0.00038]
Gold Plated Part Numbers
Matrix for Tin Plated
Part Numbers
1445341 YYYY
1445344 YYYY
1445347 YYYY
1445350 YYYY
1445353 YYYY
1445356 YYYY
1445359 YYYY
1445362 YYYY
1445365 YYYY
1445368 YYYY
1445371 YYYY
1445374 YYYY
Headers Headers
MTA-50 IDC Connector Kit / Header Mateability Guide
MTA-50 IDC Connectors and Headers
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341