Information

99
Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
FASTON Terminals (Insulated and Uninsulated)
PIDG FASTON Receptacles and Tabs
PIDG FASTON Receptacles and Tabs
Here is a pre-insulated
terminal designed for
complete and uniform
reliability in most difficult
circuit environments. Each
PIDG Terminal consists of a
tin plated brass body with a
specially designed copper
sleeve and insulation sleeve
fitted over the terminal
barrel. The design of the tool
dies and the construction
of the terminal promotes
uniform insulation thickness
under crimping pressure,
transmitting this pressure
evenly to the center of the
crimp area.
TE compression crimping
produces crimps for a
given size wire and terminal
that are precisely alike
in appearance and
performance. This is a
calculated result made
possible by designing the
terminal and the crimping
tool as precisely matched
devices. The dies are
precision-engineered from
the finest hard-metal alloys.
Crimping pressure is
controlled by a ratchet
device on the hand tool or
a corresponding pre-
calibration in the crimping
Temperature Rating: 105° C
Wire E66717 LR7189
Range Recognized Certified
22-16 22-16 Stranded
300 V Max.,
16-14 16-14 Stranded
12-10 12-10 Stranded
105°C Max.
1
1
UL and CSA — Nylon.
jaws of TE automated
crimping machines.
Crimping pressure can
neither over-stress nor
understress the terminal
barrel — machined dies
fully bottom to the precise
crimp height required.
The resulting termination
is free of contamination,
is resistant to shock and
critical environments,
and its tensile strength
approaches that of the
wire itself.
Product Facts
■ Pre-insulated terminal
designed for complete and
uniform reliability in the
most difficult circuit
environment
■ Consists of an unplated or
tin plated brass body or a
tin plated phosphor bronze
body with a specially
designed copper sleeve and
insulation sleeve fitted over
the terminal barrel
■ Design of the tool dies and
construction of the terminal
insures uniform insulation
thickness under crimping
pressure, transmitting this
pressure evenly to the
center of the crimp area
The TE Mated Tool/Terminal
Concept
■ TE compression crimping
produces crimps for a
given size wire and terminal
that are precisely alike
in appearance and
performance
■ Terminal and the crimping
tool are designed as
precisely matched devices
■ Dies are precision-
engineered from the finest
hard-metal alloys
■ Crimping pressure is
controlled by a ratchet
device on the hand tool
or a corresponding pre-
calibration in the crimping
jaws of TE automated
crimping machines
The Crimp
■ Crimping pressure does not
overstress nor understress
the terminal barrel —
machined dies fully bottom
to the precise crimp height
■ Resulting termination is
free of contamination
■ Resistant to most shock and
critical environments
■ Tensile strength approaches
that of the wire itself
R
R