Information

95
Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
FASTON Terminals (Insulated and Uninsulated)
Ultra-Pod Fully Insulated FASTON Receptacles
Ultra-Pod Fully Insulated FASTON Receptacles and Tabs
Product Facts
■ Reduced insertion force
■ Designed for correct lead-in
of tab
■ Mates with typical 110, 187
and 250 series tab styles
including those with
shoulders
■ 110 series accepts 22-18
AWG [0.3–1 mm
2
], 187
series accepts 20-16 AWG
[0.5–1.4mm
2
] wire and
250 series accepts 22-10
AWG [0.3–5 mm
2
] wire
■ Visual inspection of crimp
and wire brush
■ Terminated by automatic or
semi-automatic equipment
to meet production
requirements
■ Complies with the IEC 380,
601 and 950 and UL 1950
requirements for a
secondary means of
insulation fixing
■ Listed by Underwriters
Laboratories Inc.,
File No. E66717
■ CSA certified,
File No. LR 7189
Technical Documents
Product Specification
108-1285
108-2215
Application Specification
114-2124
Hand Tools — Insertion
250 Series—314916-1
250 Series Flag—314919-1
Hand Tools — Extraction
250 Series—314917-1
Ultra-Pod fully insulated
FASTON receptacles offer
the newest in one-step
automatic application of
insulated quick connects.
The unique integral plastic
carrier designed specifically
for this product allows
insulated F-Crimp
terminations to be produced
quickly and easily. Applied
cost savings are attainable
with either bench or
high-speed automatic
termination equipment
and the elimination of any
secondary insulation
operations. Both the
crimping of the terminal and
the terminal insulating occur
in a single stroke of the
press and applicator —
the crimping on the down-
stroke and the insulating on
the up-stroke.
The receptacles contained
within the Ultra-Pod
FASTON receptacle
assemblies are tested and
customer qualified and
can be used in existing
applications where
insulation has been
accomplished by other
means. The low insertion
force design provides easier
tab insertion, reduces
operator fatigue and
improves the productivity
and reliability of the end
assembly operation.
The insulating housing is
produced by a unique
molding process which
provides an integral carrier
and eliminates the crimp
location problems related to
secondary carriers. This
housing, produced from
130°C rated 6/6 nylon,
covers the FASTON
receptacle sufficiently to
provide for use in 600-volt
applications. Most
importantly, this insulating
system helps eliminate the
workplace hazards and
labor costs of chemically
expanded or heat shrink
tubing.
Depending on production
requirements, TE provides
a complete selection of
terminating equipment from
bench press to automatic
lead maker.
R
R