Information

Product Specification 108-5262
Rev. C8 6 of 15
3.4 Performance and Test Descriptions:
The product is designed to meet the electrical, mechanical and environmental performance
requirements specified in Para. 3.5. All tests are performed at ambient temperature unless
otherwise specified.
3.5 Test Requirements and Procedures Summary:
Para. Test Items Requirements Procedures
3.5.1
Confirmation of Product Product shall be conforming to
the requirements of applicable
product drawing and
Application Specification
114-5082
Visually, dimensionally and
functionally inspected per applicable
inspection plan.
3.5.2
Connector Mating Force
No. of Pos.
Mating Force
N Max.
Measure the force required to mate
connector using locking latch by
operating at 100mm approx. a
minute, with the locking mechanism
of housing set in effect.
1
39
2
49
3
59
4
68.6
6
78.5
8
98
10
118
12
137
3.5.3
Contact Mating Force
2.94～7.85N :
per .070 Ser. Contact
Measure the force required to mate
contact by operating the head at a
rate of 100mm approx. a minute.
3.5.4
Connector Unmating
Force
No. of Pos.
Mating Force
N Max.
Measure the force required to
unmate connector using locking
latch by operating at 100mm a
minute, without the locking
mechanism of housing set in effect.
1
29
2
39
3
49
4
68.6
6
78.5
8
98
10
118
12
137
3.5.5
Contact Unmating
Force
2.94～7.85N :
.070 Ser. Contact
Apply an axial pull-off load to one of
mated contacts. Measure the force
required to unmate contact by
operating the head at a rate of
100mm approx. a minute.