Datasheet

108-20090
Rev. C1 Page 8 of 14
LOC I
FTEC174 rev. 1 July 99
FEATURES TEST CONDITIONS LIMITS
3.20
Vibration Test
Mated connectors placed on a
platform as per Fig.3, subjected
to vibrations with following
parameters:
- Frequency: 10 - 500 - 10Hz
- Speed of frequency variation:
1octave/min.
- Displacement: 0,75mm for
frequencies below 70Hz.
Over 70Hz maintain a constant
acceleration of 150m/s
2
- Duration: 2hours each axis
- 10 cycles mating/unmating
- No damages
- Dielectric withstanding
resistance as above specified
- Voltage drop ≤ 5mV/A
- Contact retention in housing,
mating/unmating forces as
above specified
- No circuit break greater than
1µs
3.21
High temperature
resistance with current
load
Mated connectors subjected to a
temperature of 80°C for 5 hours
with all contacts loaded with
max.current of 14A (1,5sqmm
wires)
Max. increase of temperature
detected on transition between
contact body and wire barrel:
50°C
3.22
Current overload
Mated connectors subjected to
500 cycles with current of 21A
(1,5sqmm wires).
Each cycle composed of:
- 45 min. current ON
- 15 min. current OFF
Max. increase of temperature
detected on transition between
contact body and wire barrel:
60°C
3.23
Durability
Mate-unmate 10 times the tabs
of Fig.1 at a constant speed of
25÷100mm/min.
Voltage drop: ≤ 3mV/A
Contact resistance: ≤ 3mΩ
NOTE: SEE NEXT PAGE FOR TEST GROUPS AND SEQUENCE.