Information

ManualsBrandsTE CONNECTIVITY ManualsPCB ConnectorsReceptacles (standard) AMPMODU HV-100 Total number of pins 5 Contact spacing: 2.54 mm 1 pc(s)

AMPMODU

Interconnection System

European Standard Products

RoHS

Ready

Summary of content (52 pages)

PAGE 1
RoHS Ready AMPMODU Interconnection System European Standard Products 1
PAGE 2
TYCO ELECTRONICS TECHNOLOGY PORTFOLIO ● Connector Systems / Electromechanical Components ● Relays ● Wireless ● Antennas, GPS Antennas, Integrated Antenna Systems ● Sensors ● Wire & Cable ● Resistors and Inductors ● Circuit Protection Devices ● Heat Sinks /Thermal Management ● Touchscreens / Interactive Displays ● Switches ● Application Tooling ● Battery Assemblies ● Fiber Optic (Passive) ● Power Systems / Electronic Modules ● Heat Shrink Tubing ● Magnetics ● Identification & Labeling Products ●
PAGE 3
AMPMODU Interconnection System Contents AMPMODU 3.96mm Centreline Interconnection System Page MOD I Receptacle Housings and Crimp Contacts ………………………………………………………………………………………………6 MOD I PCB Receptacle Contacts ……………………………………………………………………………………………………………………………7 MOD I Shrouded Headers ………………………………………………………………………………………………………………………………………8 MOD I Unshrouded Headers……………………………………………………………………………………………………………………………………9 MOD I Shunt Connectors …………………………………………………………………………………………………………………………………………9 AMPMODU 2.
PAGE 4
AMPMODU Interconnection System Restriction on the Use of Hazardous Substances (RoHS) At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalogue are identified as: RoHS Compliant Part numbers in this catalog are RoHS Compliant, unless marked otherwise.
PAGE 5
AMPMODU 3.96mm Centreline Interconnection System Product Facts ■ Rugged connector system featuring 0.79 x 1.
PAGE 6
AMPMODU 3.96mm Centreline Interconnection System MOD I Receptacle Housings Single Row Mating Connectors: Specification: Housing - Green glass fibre filled polycarbonate, UL 94V-1 rated MOD I Shrouded Headers - Page 8 Technical Documents: Product Specification - 108-20026 Application Specification - 114-20040 No. of Positions 2 4 6 8 10 12 Dimension A 7.8 15.7 23.7 31.6 39.5 47.4 B 3.96 11.89 19.81 27.74 35.66 43.
PAGE 7
AMPMODU 3.
PAGE 8
AMPMODU 3.96mm Centreline Interconnection System MOD I Shrouded Headers Straight Specification: Housing Mating Connectors: - Green glass fibre filled polycarbonate, UL 94V-1 rated - Brass (gold plating) or phosphor bronze (tin plating). Plating details as follows: - Gold 0.4 μm on contact area, tin on solder area, with entire post underplated 1.3 μm nickel - Tin 3.8 μm min Posts Plating A Plating B MOD I Receptacle Housings - Page 6 Technical Documents: Product Specification - 108-20026 No.
PAGE 9
AMPMODU 3.96mm Centreline Interconnection System MOD I Unshrouded Headers Straight Specification: Mating Connectors: Housing - Thermoplastic polyester, green UL94V-0 rated Posts - Brass Plating A - 0.8 μm gold on contact area (F), tin on solder area, with entire post underplated 1.3 μm nickel Plating B - Tin plated 2.5 μm min tin over 1.3 μm nickel MOD I PCB Receptacle Contacts - Page 7 Technical Documents: Product Specification - 108-20026 No.
PAGE 10
AMPMODU 3.96mm Centreline Interconnection System Engineering Notes 10 Catalogue No. 1773393 November 2006 Dimensions are shown in mm for reference purposes only. Specifications subject to change. www.tycoelectronics.
PAGE 11
AMPMODU 2.54mm Centreline Interconnection System - Italian Range Product Facts ■ Single and double row connector system featuring 0.
PAGE 12
AMPMODU 2.54mm Centreline Interconnection System - Italian Range MOD II Receptacle Housings Single and Double Row Specification: Housing Mating Connectors: - Black thermoplastic, UL 94V-1 rated MOD II Shrouded Headers - Pages 15-16 MOD II Pin Housings - Page 13 Technical Documents: Product Specification - 108-20025 Application Specification - 114-20004 Single Row Double Row No. of Positions 2 4 6 8 9 10 12 15 22 Dimension A 7.1 12.2 17.3 22.3 24.9 27.4 32.5 40.1 57.9 B 2.54 7.62 12.70 17.78 20.
PAGE 13
AMPMODU 2.54mm Centreline Interconnection System - Italian Range MOD II Pin Housings Single and Double Row Specification: Housing Mating Connectors: - Black thermoplastic, UL 94V-1 rated MOD II Receptacle Housings - Page 12 MOD II PCB Receptacles - Page 14 Technical Documents: Product Specification - 108-20025 Single Row Double Row No. of Positions 2 4 6 8 9 10 12 15 Dimension A 7.4 12.5 17.5 22.6 25.1 27.7 32.8 40.4 Part Number 280628 280629 280630 280631 280632 280633 280634 280635 B 2.54 7.
PAGE 14
AMPMODU 2.54mm Centreline Interconnection System - Italian Range MOD II Receptacles Vertical PCB Mount Specification: Housing Mating Connectors: - Black glass fibre filled polyester, UL 94V-0 rated MOD II Shrouded Headers - Pages 15-16 MOD II Pin Housings - Page 13 Contacts - Phosphor bronze, plated as follows: Plating A - Selectively plated 0.4 μm gold on contact area, with gold flash over nickel on entire contact Technical Documents: Plating B - Tin 0.
PAGE 15
AMPMODU 2.54mm Centreline Interconnection System - Italian Range MOD II Shrouded Headers Straight, Single Row Specification: Mating Connectors: Housing - Black thermoplastic, UL 94V-0 rated Posts - Brass (gold plating) or phosphor bronze (tin plating). Plating details as follows: Plating A - Gold 0.8 μm on contact area and 2.5 μm tin on solder area, with entire post underplated 1.3 μm nickel Plating B - Gold 0.4 μm on contact area and 2.5 μm tin on solder area, with entire post underplated 1.
PAGE 16
AMPMODU 2.54mm Centreline Interconnection System - Italian Range MOD II Shrouded Headers Right Angle, Single Row Specification: Mating Connectors: Housing - Black thermoplastic, UL 94V-0 rated Posts - Brass (gold plating) or phosphor bronze (tin plating). Plating details as follows: Plating A - Gold 0.8 μm on contact area and 2.5 μm tin on solder area, with entire post underplated 1.3 μm nickel Plating B - Gold 0.4 μm on contact area and 2.5 μm tin on solder area, with entire post underplated 1.
PAGE 17
AMPMODU 2.54mm Centreline Interconnection System Product Facts ■ Comprehensive single and double row connector system featuring 0.
PAGE 18
AMPMODU 2.54mm Centreline Interconnection System MOD II Low Cost Line Breakaway Pin Headers Straight, Single Row 0.63mm Square Post Specification: Mating Connectors: Housing - Green polyester, glass filled, UL 94V-0 rated Posts - Phosphor bronze, plated as follows: HV100 PCB Receptacles - Pages 24-28 HV190 PCB Receptacles - Page 29 MOD IV Receptacle Housings - Page 34 Plating A - Contact Zone (Area F) 0.8 μm gold over 1.3 μm nickel - Soldering Zone 3 μm min. tin over 1.
PAGE 19
AMPMODU 2.54mm Centreline Interconnection System MOD II Low Cost Line Breakaway Pin Headers Right Angle, Single Row 0.63mm Square Post Specification: Mating Connectors: Housing - Green polyester, glass filled, UL 94V-0 rated Posts - Phosphor bronze, plated as follows: Plating A - Contact Zone (Area F) 0.8 μm gold over 1.3 μm nickel HV100 PCB Receptacles - Pages 24-28 HV190 PCB Receptacles - Page 29 MOD IV Receptacle Housings - Page 34 - Soldering Zone 3 μm min. tin over 1.
PAGE 20
AMPMODU 2.54mm Centreline Interconnection System MOD II Economy Line Breakaway Pin Headers Straight, Single Row 0.63mm Square Post Specification: Mating Connectors: Housing - Green polyester, glass filled, UL 94V-0 rated Posts - Phosphor bronze, plated as follows: Plating A - Contact Zone (Area F) 0.8 μm gold over 1.3 μm nickel MOD IV Receptacle Housings - Page 34 - Soldering Zone 2.5 μm min. tin over 1.3 μm nickel Plating B - 2 μm min. tin over 1.
PAGE 21
AMPMODU 2.54mm Centreline Interconnection System MOD II Economy Line Breakaway Pin Headers Right Angle, Single Row 0.63mm Square Post Specification: Mating Connectors: Housing - Green polyester, glass filled, UL 94V-0 rated MOD IV Receptacle Housings - Page 34 Posts - Phosphor bronze, plated as follows: Plating - Contact Zone (Area F) 0.8 μm gold over 1.3 μm nickel - Soldering Zone 2 μm min. tin over 1.3 μm nickel Technical Documents: Product Specification - 108-18012 No.
PAGE 22
AMPMODU 2.54mm Centreline Interconnection System MOD II Surface Mount Breakaway Pin Headers Straight, Single Row 0.63mm Square Post - End Stackable Specification: Mating Connectors: Housing and - PCT GV Black pick & place cap HV100 PCB Receptacles - Pages 24-28 HV190 PCB Receptacles - Page 29 MOD IV Receptacle Housings - Page 34 Posts - Phosphor bronze, plated as follows: - Contact Zone (Area F) 0.8 μm gold over 1.3 μm nickel - Soldering Zone 2.5 μm min. tin over 1.
PAGE 23
AMPMODU 2.54mm Centreline Interconnection System MOD II ACTION PIN Breakaway Pin Headers Straight 0.63mm Square Post Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated Posts - Phosphor bronze, plated as follows: Plating A - Contact Zone (Area F) 0.1 μm gold, over 0.7 μm palladium alloy, over 1.27 μm nickel Plating B HV100 PCB Receptacles - Pages 24-28 HV190 PCB Receptacles - Page 29 MOD IV Receptacle Housings - Page 34 - Action Pin Zone 2 μm min. tin over 1.
PAGE 24
AMPMODU 2.54mm Centreline Interconnection System HV-100 Receptacles, Vertical PCB Mount Single Row, Kinked Legs with Retention Feature - Top Entry Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated MOD II Pin Headers - Pages 18-19 & 22-23 Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel (N x 2,54) - Soldering Zone 2.5 μm tin over 1.3 μm nickel (N–1) x 2,54 2,52 2,54 Plating B - 2.
PAGE 25
AMPMODU 2.54mm Centreline Interconnection System HV-100 Receptacles, Vertical PCB Mount, Sealed Single Row, Kinked Legs with Retention Feature - Top Entry Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel MOD II Pin Headers - Pages 18-19 & 22-23 - Soldering Zone 2.5 μm tin over 1.3 μm nickel Plating B - 2.
PAGE 26
AMPMODU 2.54mm Centreline Interconnection System HV-100 Receptacles, Vertical PCB Mount Single Row, Top or Bottom Entry Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel MOD II Pin Headers - Pages 18-19 & 22-23 - Soldering Zone 2.5 μm tin over 1.3 μm nickel Plating B - 2.5 μm tin Technical Documents: Product Specification - 108-19056 No.
PAGE 27
AMPMODU 2.54mm Centreline Interconnection System HV-100 Receptacles, Vertical PCB Mount Single Row, Top or Bottom Entry Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel MOD II Pin Headers - Pages 18-19 & 22-23 - Soldering Zone 2.5 μm tin over 1.3 μm nickel Plating B - 2.5 μm tin Technical Documents: Product Specification - 108-19056 No.
PAGE 28
AMPMODU 2.54mm Centreline Interconnection System HV-100 Surface Mount Receptacles, Vertical PCB Mount Single Row, Top or Bottom Entry - End Stackable Specification: Mating Connectors: Housing and - Liquid Crystal Polymer (LCP), black, pick & place cap UL 94V-0 rated MOD II Pin Headers - Pages 18-19 & 22-23 Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel - Soldering Zone 2.5 μm tin over 1.3 μm nickel Plating B - 2.
PAGE 29
AMPMODU 2.54mm Centreline Interconnection System HV-190 Receptacles, Horizontal PCB Mount Single Row, Side Entry - End Stackable Specification: Mating Connectors: Housing - Polyester, glass filled, green UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: Plating A - Contact Zone 0.8 μm gold over 1.3 μm nickel MOD II Pin Headers - Pages 18-19 & 22-23 - Soldering Zone 2.5 μm tin over 1.3 μm nickel Plating B - 2.5 μm tin Technical Documents: Product Specification -108-19072 No.
PAGE 30
AMPMODU 2.54mm Centreline Interconnection System MOD II High Temperature Shrouded Headers Straight, Single Row 0.63mm Round Post Specification: Mating Connectors: Housing - Polyester for high operating temp. (PCT), black, glass fibre filled Posts - Phosphor bronze, (Plating A) or brass (Plating B) plated as follows: Plating A - Contact Zone (Area F) 0.1 μm gold over 0.7 μm palladium alloy, over 1.3 μm nickel MOD IV Receptacle Housings - Page 32 - Soldering Zone 2 μm min. tin over 1.
PAGE 31
AMPMODU 2.54mm Centreline Interconnection System MOD II High Temperature Shrouded Headers Right Angle, Single Row 0.63mm Round Post Specification: Mating Connectors: Housing - Polyester for high operating temp. (PCT), black, glass fibre filled Posts - Phosphor bronze, (Plating A) or brass (Plating B) plated as follows: Plating A - Contact Zone (Area F) 0.1 μm gold over 0.7 μm palladium alloy, over 1.3 μm nickel MOD IV Receptacle Housings - Page 32 - Soldering Zone 2 μm min. tin over 1.
PAGE 32
AMPMODU 2.54mm Centreline Interconnection System MOD IV Receptacle Housings Single Row Specification: Housing Mating Connectors: - Polyester (PBT) black, glass fibre filled MOD II High Temp Shrouded Headers - Pages 30-31 Technical Documents: Product Specification - 108-25007 - 108-25020 - 108-25021 Application Specification - 114-25003 No. of Positions 3 4 5 6 7 8 9 10 20 36 Dimension A 7.62 10.16 12.70 15.24 17.78 20.32 22.86 25.40 50.80 91.44 B 5.08 7.62 10.16 12.70 15.24 17.78 20.32 22.86 48.26 88.
PAGE 33
AMPMODU 2.54mm Centreline Interconnection System MOD IV Accessories Specification: For use with: Retention Plugs - Polycarbonate, glass fibre filled Keying Plug MOD IV Receptacle Housings - Page 32 - Polyamide 6.
PAGE 34
AMPMODU 2.54mm Centreline Interconnection System MOD IV Receptacle Housings Single Row, with and without Strain Relief Specification: Housing Mating Connectors: - Green polyamide, 6.6 UL 94V-HB rated With strain relief MOD II Pin Headers - Pages 20-21 Without strain relief MOD II Pin Headers - Pages 18-19 & 22-23 Technical Documents: Product Specification - 108-25007 - 108-25020 - 108-25021 Application Specification - 114-25003 with Strain Relief No.
PAGE 35
AMPMODU 2.54mm Centreline Interconnection System MOD IV/V Crimp Snap-In Receptacle Contacts with Insulation Support Specification: For use with: Material - Phosphor bronze, plated as follows: Plating A - Selectively plated 0.8 μm gold on contact area, gold flash on crimp area, with entire contact underplated 1.3 μm nickel Plating B - Selectively plated 0.8 μm gold on contact area, with gold flash over 1.3 μm nickel on entire contact Plating C - Selectively plated 0.
PAGE 36
AMPMODU 2.
PAGE 37
AMPMODU Locking Clip Connectors Product Facts ■ Self retaining contact system ■ Rapid installation ■ Connection to 0.63 x 0.63 or 0.79 x 1.57mm posts ■ Flame retardant thermoplastic housings are UL 94V-0 rated ■ Tin or gold plated contacts Specification: Current Rating - 3 A (0.63 x 0.63mm posts) 5 A (0.79 x 1.
PAGE 38
AMPMODU Locking Clip Connectors Locking Clip Receptacle Housings Single Row, for 0.63mm Square Posts Specification: Housing Mating Connectors: - Thermoplastic Polyester GV, Black, UL 94V-0 Rated MOD II Pin Headers - Pages 18-19 & 22-23 Technical Documents: Product Specification - 108-36028 & 108-36028-1 Application Specification - 114-25006 Both Ends Closed Housings No. of Cavities 1 2 3 4 5 6 7 8 9 10 Stackable Side Open Housings Dimension A 2.9 5.5 8.1 10.6 13.2 15.7 18.3 20.8 23.3 25.9 B – 2.54 5.
PAGE 39
AMPMODU Locking Clip Connectors Locking Clip Crimp Snap-In Receptacle Contacts for 0.63mm Square Posts Specification: For use with: Material - Phosphor bronze Spring - Stainless steel Locking Clip Receptacle Housings - Page 38 Plating A - Selectively plated 0.8 μm gold on contact area, with gold flash over 1.3 μm nickel on entire contact Plating B - 2.5 μm tin over 1.
PAGE 40
AMPMODU Locking Clip Connectors Locking Clip Receptacle Housings Single Row, for 0.79 x 1.57mm Posts Specification: Housing Mating Connectors: - Polyamide GV, Black, UL 94V-0 Rated MOD I Unshrouded Headers - Page 9 Technical Documents: Product Specification - 108-36029 Application Specification - 114-25008 No. of Positions 1 2 3 4 5 6 7 8 9 10 A – – 3.96 3.96 7.92 7.92 11.90 11.90 15.84 15.84 Dimension B – – 3.96 7.92 7.92 11.90 11.90 15.84 15.84 19.
PAGE 41
HE 13 / HE 14 - 2.54mm Centreline Interconnection System Product Facts ■ Receptacle assemblies preloaded with Insulation Displacement Contacts (IDC) to terminate discrete wires or 2.54mm centreline ribbon cable ■ Receptacle housings accept crimp snap-in contacts to terminate discrete wires ■ Headers provided for straight or right-angle mounting to be soldered onto 1.
PAGE 42
HE 13 / HE 14 - 2.54mm Centreline Interconnection System IDC Receptacle Assemblies Straight Single Row Specification: Mating Connectors: Housing - Blue flame retardant glass filled polyester, UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: HE 13 - Selectively plated 0.4 μm gold on contact area, 0.8 μm tin min on termination area with entire contact underplated 1.3 μm nickel - Plated 1 μm min.
PAGE 43
HE 13 / HE 14 - 2.54mm Centreline Interconnection System IDC Receptacle Assemblies Right Angle Single Row Specification: Mating Connectors: HE 13 / HE 14 Shrouded Headers Pages 44-45 Housing - Blue flame retardant glass filled polyester, UL 94V-0 rated Contacts - Phosphor bronze, plated as follows: HE 13 - Selectively plated 0.4 μm gold on contact area, 0.8 μm tin min on termination area with entire contact underplated 1.3 μm nickel - Plated 1 μm min.
PAGE 44
HE 13 / HE 14 - 2.54mm Centreline Interconnection System Shrouded Headers Straight 0.63mm Square Post Specification: Mating Connectors: Housing - Blue flame retardant high temperature nylon, UL 94V-0 rated HE 13 / HE 14 IDC Receptacles Pages 42-43 Posts - Phosphor bronze, plated as follows: HE 13 - Selectively plated 0.4 μm gold on contact area, gold flash on insertion area, 2.5 μm tin min on solder tail with entire post underplated 1.3 μm nickel - Tin plated min. 2.
PAGE 45
HE 13 / HE 14 - 2.54mm Centreline Interconnection System Shrouded Headers Right Angle 0.63mm Square Post Specification: Mating Connectors: Housing - Blue flame retardant high temperature nylon, UL 94V-0 rated HE 13 / HE 14 IDC Receptacles Pages 42-43 Posts - Phosphor bronze, plated as follows: HE 13 - Selectively plated 0.4 μm gold on contact area, gold flash on insertion area, 2.5 μm tin min on solder tail with entire post underplated 1.3 μm nickel - Tin plated min. 2.
PAGE 46
HE 13 / HE 14 - 2.54mm Centreline Interconnection System Receptacle Housings Single and Double Row Specification: Housing Mating Connectors: HE 13 / HE 14 Shrouded Headers Pages 44-45 - Blue flame retardant glass filled polyester, UL 94V-0 rated Technical Documents: Product Specification - 108-15053 Double Row Single Row No. of Positions 3 4 5 6 7 8 10 12 15 18 Dimension A 5.08 7.62 10.16 12.70 15.24 17.78 22.86 27.94 35.56 43.18 Part Number B 7.62 10.16 12.70 15.24 17.78 20.32 25.40 30.48 38.10 45.
PAGE 47
AMPMODU Interconnection System Engineering Notes 47 Catalogue No. 1773393 November 2006 Dimensions are shown in mm for reference purposes only. Specifications subject to change. www.tycoelectronics.
PAGE 48
AMPMODU Interconnection System Engineering Notes 48 Catalogue No. 1773393 November 2006 Dimensions are shown in mm for reference purposes only. Specifications subject to change. www.tycoelectronics.
PAGE 49
AMPMODU Interconnection System Application Tooling Tooling and equipment options are many, varied and are continually improved. Visit our Application Tooling website at www.tooling.tycoelectronics.com/europe Save it as one of your favourites! Helping yourself ■ If you are new to referencing our Terminals / Contacts to hand tools, we strongly recommend that you read our one page guide to selecting the right tool in our online hand tool catalogue.
PAGE 50
AMPMODU Interconnection System Part Number Index Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number 85861 36 215298 24 280512 12 281331 14 826654 Part Number 19 Page Number 85863 36 215299 24 280513 12 281332 14 826656 18 85865 36 215300 24 280514 12 281333 14 826658 18 85866 36 215301 25 280515 12 281334 14 826662 19 86181 7 215302 25 280520 15 281336 14 826664 19 86286 14, 36 215303 25 280521 15
PAGE 51
AMPMODU Interconnection System Global Contacts Americas Argentina – Buenos Aires Phone: +54-1-733-2000 Fax: +54-1-717-0988 Chile – Santiago Phone: +56-2-739-1230 Fax: +56-2-739-1227 Brasil – São Paulo Phone: +55-11-2103-6000 Fax: +55-11-2103-6200 Colombia – Bogota Phone: +57-1-231-9398 Fax: +57-1-240-3769 Canada – Toronto Phone: +905-475-6222 Fax: +905-474-5520 Mexico – Mexico City Phone: +52-5-729-0400 Fax: +52-5-361-8545 United States Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Troy,
PAGE 52
Tyco Electronics UK Limited Faraday Road, Dorcan, Swindon, Wiltshire. SN3 5HH Phone: 08706 080208 Fax: 01793 572516 www.tycoelectronics.