Information
82
Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Application Tooling (Continued)
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request Catalog
65004 (AMP-O-MATIC Stripper-
Crimper Machines), Catalog 82275
[Crimp Quality Monitor (CQM)].
AMP-O-MATIC Stripper-
Crimper Machines,
Part Nos. 1320895-1, -2
Semiautomatic bench
crimping machines that also
strip the wire, and are there-
fore used for terminating
jacketed cable. Feature
manual precision adjust-
ment of crimp height, keyed
strip blades for faster, more
accurate setups, and an
efficient scrap removal sys-
tem. All adjustments can be
made from the front of the
machines without special
tools. Available with crimp
quality monitoring.
For more information, request
Catalog 65004, Video 198075, Catalog
82275 [Crimp Quality Monitor
(CQM)], Video 198094.
Stripper-Crimper Machines
Komax Delta 60
Wire Stripper
The semiautomatic Delta 60 is
designed to strip single- and
multiple-pole conductors with
pull-off lengths of .984 [25] or
3.78 [96]. Thanks to the
electric drive and non-
pneumatic design, the device
is quick and quiet in operation
and can be utilized virtually
anywhere. The Delta 60 can
desheath or strip stranded
conductors and multiple wire
cables with external diameters
of up to .433 [11].
See catalog 1654956 for more information.
Cosmic 927R Micro-Cable
Stripper
The compact, lightweight,
benchtop Cosmic 927R was
designed and developed to
reliably strip various insulation
materials and micro-cable.
From conductor diameter
36 to 10 AWG, the stripping
diameter display can be set to
within 0.1 mm increments.
See catalog 1773385-4 for more
information.
Cosmic 30M Wire Stripping
Machine, 5-528367-0
The Cosmic 30M is a high
precision, high speed
electrical wire stripper that is
very easy to operate. It’s
equipped with a four blade
system and an optional
gripper for more difficult wires.
There is a digital display for
the wire diameter that can be
set at 0.01 mm increments.
See catalog 1773385-2 for more
information.
89827
Stripping Module (for the
AMP 3K/40 and AMP 5K/40
Terminating Machines and
AMP-O-LECTRIC Model “G”
Terminator on page 77)
The combination of the
Stripping Module with the
AMP 3K/40 and AMP 5K/40
Terminating Machines or
the AMP-O-LECTRIC
Model “G” Terminator
provides an economic and
proficient method of
stripping the wire and
crimping terminals on the
same machine. The module
accepts End- and Side-
Feed HDM Applicators
(32-14 AWG) and operates
in three modes: crimp only,
strip only, or strip and
crimp. It can be installed
on existing machines in the
field or purchased as one
unit from the factory.
112075-2
For more information, request
Catalog 1309085.
Side-Feed Heavy-Duty
Miniature Applicators
(coded HDM)
Interchangeable applicators
for crimping products
reeled side-by-side on sin-
gle or dual carrier strips
(primarily closed-barrel ter-
minals and open-barrel con-
tacts). Similar design as the
end-feed version. All side-
feed applicators include a
wire stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Catalog 296393-2 and
Instruction Sheet 408-8040.
89828
Application Tooling