Information

139
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
Cable Connectors
Unshielded Cable Clamps (Continued)
M
etal-Shell HDP-20
Plug or Receptacle
(Shown for Ref. only)
Female Screwlock
(
Order separately,
see page 144.)
A
Max.
B
.770
[19.56]
Max. Max.
Shell
Dimensions
Cable Dia. Cable Dia.
Cable Gate Thread
Cable Clamp Kit No.
Size
A
B
(without Gate) (with Gate)
Identification* Size
.200
2A
5.08
2
1
.575 1.312 .400 .260
2
B
4
-40 5745122-2
4
0.01 33.32 10.16 6.60
.320
2C
8.13
.
250
3
A
6
.35
3
2.115 1.421 .500 .340
3B
4-40 5745121-2
53.72 36.09 12.70 8.64
.420
3C
10.67
*Molded-in identification (as shown in chart above) is provided on cable support gates to facilitate proper selection with
regard to shell size and maximum acceptable cable diameter.
Notes: 1. All parts are packaged unassembled.
2. Cable diameter is adjustable by changing cable support gates.
Straight Exit Dataphone
Material and Finish:
Cable Clamp Housing—
Nylon, black
4-40 Fillister Head Screws & Hex
Nuts—Steel, clear zinc plated
Jackscrews—Steel, black zinc plated
Related Product Data:
Connectors used with:
HDP Metal-Shell—pages 90-102
Straight Exit for Jacketed
Cable (Two-Piece)
HDE or HDP Plug
or Receptacle
(Shown for Ref. only)
A
B
C
D
1.920
[48.77]
4-40 Male Jackscrew Kit Nos.:
747784-8 (bulk packed)*†
*Each part is individually bulk
packed for multiple kit orders.
†Slotted for screwdriver use.
Cable Clamp Kits with Grommets
Cable No. of
Shell
Dimensions
O.D. Grommets Kit Numbers
Size
ABCD
Range Per Set
1.215 1.910 .570 .630 .185-.320
1
30.86 48.51 14.48 16.00 4.70-8.13
4 5748678-1
1.545 1.910 .620 .620 .185-.320
2
39.24 48.51 15.75 15.75 4.70-8.13
4 5748678-2
2.090 1.920 .680 .640 .255-.470
3
53.09 48.77 17.27 16.26 6.48-11.94
6 5748678-3
2.738 1.920 .800 .620 .255-.470
4
69.55 48.77 20.32 15.75 6.48-11.94
6 5748678-4
2.644 1.920 .900 .730 .255-.470
5
67.16 48.77 22.86 18.54 6.48-11.94
6 5748678-5
Notes: 1. All parts are packaged unassembled.
2. Jackscrews must be purchased separately.
3. Split-ring and crimp ferrules are shown on pages 143-145.
4. Shielded cable clamps will not accept connector housings with clinch nuts.
This cable clamp allows
cable to be fully prepared
and terminated to the
connector before the clamp
is installed.
Material and Finish:
Cable Clamps—ABS black
4-40 Fillister Head Screws and
Hex Nuts—Steel, zinc plated
4-40 Mounting Screws—Steel, zinc
plated
Jackscrews—Stainless steel,
passivated
Related Product Data:
Ferrules—pages 143-145
Connectors used with:
HDE Metal-Shell—pages 114 & 115
HDP Metal-Shell—pages 90-102
Other accessory capabilities:
Spring Latch (Two-Piece)—
page 152
Technical Documents:
Instruction Sheet—408-6609
Note: All part numbers are RoHS compliant.