Brochure

43
One-Piece Sealed Circular Plastic Connectors
Product Facts
Economical environmentally
sealed connector designed
for industrial applications
Meets major Industrial
Standards
High strength, impact
resistant thermoplastic
housing, rated UL 94V-0
Contains wire entry and
peripheral seals
AMP POWERBAND precision
formed power contact
(Series 5 and 6)
Type III+ precision formed
signal/low current contacts
(Series 1 and Series 6)
Other configurations in
Series 1 can be made
available, contact your local
Tyco Electronics Sales
Engineer or Tyco Electronics,
Harrisburg, PA
The new Sealed One-Piece
Circular Plastic Connectors
are the latest product
innovation to the sealed
CPC product family. This
design allows for easy
assembly. The housing and
the seal are attached. A
newly designed wire entry
seal protects the rear of the
connector and a peripheral
seal protects the connector
interface. Simply crimp the
contact onto a wire and
insert the crimped wire
contact through the seal
and into the housing cavity.
The connector loads the
same as if the seal wasn’t
there. All connector cavities
come in a sealed condition.
No plugs are required if
you do not use a position
cavity. We have the
capability to provide this
product sealing to you in all
the shell sizes. If you don’t
see your particular size
configuration, contact your
local Tyco Electronics
Sales Engineer or call Tyco
Electronics for the latest
information.
Industry Standards
One-Piece Sealed CPC
products meet –
IP 67 (Temporary
immersion)
Fluid Protection Against –
diesel fuel, gear and
engine lubricants, gasoline,
anti-freeze, hydraulic fluid,
water, salt sprays, etc.
Performance Characteristics
meets the same
performance character-
istics as shown on page 6.
Operating Temperature Range
-50°C to +125°C [-58˚F to +257˚F]
UL Voltage Rating
Series 1 600 V (AC or DC)
Series 6 250 V (AC or DC)
.125 POWERBAND Power Contact –
45 amps, single contact
rating at 30°C T-Rise
Type III+ Contacts –
13 amps, single contact
rating at 30°C T-Rise
Flammability Rating
UL 94V-0 rated
Sealing Capability
Per IP 67
Housing Material
High strength, impact
resistant thermoplastic
Fluid Resistance
Diesel fuel, gear and engine lubricants,
gasoline, anti-freeze, hydraulic fluid,
water
One-Piece Sealed CPC Connectors
Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.